Region
|
Frequency
|
Price
|
Southeast Asia(4G)
|
LTE-FDD:B1/B3/B5/B8 LTE:TDD:B34/B38/B39//B40/B41
|
USD20-25
Sample:USD28(1pc)
|
Europe/Middle East/Africa/Thailand/South Korea(2G+4G)
|
LTE-FDD:B1/B3/B5/B7/B8/B20 GSM:900/1800MHz
|
USD21-26
Sample:USD29(1pc)
|
New Zealand/Australia/South America(2G+4G)
|
LTE-FDD:B1/B2/B3/B4/B5/B7/B8/B28/B66 GSM:850/900/1800/1900 MHz
|
USD22-27
Sample:USD29(1pc)
|
Function
|
Description
|
Real-time tracking
|
According to the set interval, the location data is reported 30 seconds in the default motion mode and 300 seconds in the static
mode. |
Power down alarm
|
Turn on backup battery, when the vehicle voltage is lower than 5v, the device upload a alarm to the server
|
Over speed alarm |
Set the maximum speed limit value on the platform or SMS, when the GPS speed is more than the value, the device will upload a
alarm to the server |
Low pressure alarm
|
If the voltage is less than 10V for 10S, a low-voltage alarm will be reported
|
Blind area uploading data
|
The data is stored up to 300pcs. if the terminal is located and not online, upload this data when the signal is good
|
EPO assisted location function
|
The terminal supports the EPO function to assist positioning to enhance the positioning effect.
|
Inflection upload |
When the angle of the vehicle turns is more than a certain angle, the device will upload a position information to the platform to
optimize the trajectory. |
Upgrade remotely
|
Upgrade Housekeeper remote upgrade.
|
Static mode |
The 3D triaxial acceleration sensor detects vibration status of vehicle in real time, when the car is moving, the device is in
motion mode; the device will change to static mode after 5 minutes without vibration, close the GPS module, when vibration is detected, the device automatically changes to motion mode. |