Spindle Bore 105mm Lathe Machine Ck6163 For Metal Flat Bed Cnc Lathe Machine

1. High rigidity bed The CK6163 meter machine tool bed is made of high-quality cast iron with a reasonable layout of internal ribs. The bed is an integral type with a guide rail width of 550mm and good rigidity. The sliding guide rail adopts medium frequency quenching, with a deep quenching layer and a hardness of over HRC50 °. The joint surface between the drag plate and the bed is laminated with plastic. 2. Introduction to the main transmission The spindle of this series of machine tools adopts manual four speed stepless speed regulation, with a spindle speed of (1st gear 20-80 rpm/2nd gear 50-200 rpm/3rd gear 100-330 rpm/4th gear 220-790 rpm), high torque, and good reliability. Optional hydraulic four-speed stepless speed regulation, with the spindle speed regulation being 17-70 rpm in first gear, 38-155 rpm in second gear, 75-293 rpm in third gear, 170-653 rpm in fourth gear. The spindle bearing adopts high-precision bearings, ensuring smooth operation and high accuracy. 3. Feed system The Z-axis feed system of the machine tool uses a servo motor to drive the ball screw, while the X-axis feed system uses a servo motor to directly drive the ball screw through a coupling. The main screw of the machine tool adopts high-precision screw, and the lubrication points of the feed system are regularly lubricated by the centralized lubrication system. 4. Knife holder This series of lathes adopts a vertical four station electric tool holder. The tool body on the four station tool holder does not need to be lifted during rotation, eliminating the interference of coolant and cutting on the tool holder during rotation, and has high sealing performance. 5. Electrical system (1) CNC system and servo drive system The CNC numerical control system of machine tools adopts a wide range of numerical control systems, which can adapt to efficient, high-speed, and high-precision mechanical processing, and has the characteristics of convenient operation, complete functions, and high reliability. (2) The electrical cabinet adopts a fully enclosed type

The tailstock consists of two parts: the upper body and the lower body. The upper body is equipped with a sleeve and a sleeve fast and slow movement mechanism. The tailstock sleeve cone hole of the machine is 6 on the Mohs scale and can be used with a Mohs 5 tip if attached to the cone sleeve. The tailstock of the machine tool has the characteristics of high precision, strong bearing capacity, long maintenance cycle and reliable work.

CK6163 machine bed is made of high-quality cast iron, the internal rib layout is reasonable, the bed adopts split type, the guide rail width is 550mm, and the rigidity is good. The sliding guide rail adopts medium frequency quenching, the hardening layer is deep, the hardness is above HRC50°, and the joint surface of the drag plate and the bed is pasted.