NaN / 0

High Viscosity Cyanoacrylate Adhesive Super Fast Adhesive Glue with Spray Adhesive Activator

Get Latest Price

US$ 2

≥3000 Pieces

US$ 1.5

≥30000 Pieces

US$ 1

≥1000000 Pieces

Quick Details

CAS No.:

7085-85-0

Other Names:

Super Glue MDF Kit, Super Glue MDF Kit

Place of Origin:

Guangdong, China

Brand Name:

HARTBOND

Product name:

Cyanoacrylate Super Glue MDF Kit With Activator

MF:

CH2=C(CN)-COO-C2H5

EINECS No.:

230-391-5

Classification:

Other Adhesives

Curing time:

Fast Curing

Delivery time:

About 15-30 days

Type:

Liquid Glue

Packing:

Super Glue 50g/100g + 200ml /400mlActivator

Shelf life:

18months

Product Details

PRODUCT DESCRIPTION

High Viscosity Cyanoacrylate Adhesive Super Fast Adhesive Glue with Spray Adhesive Activator

Where to use: Super Glue MDF Kit : Super Glue with spray activator ,

MDF Adhesive set, MDF kit, Cyanoacrylate Adhesive plus activator.

The MDF kit contains 50g/100g of adhesive and 200ml/400ml activator.

This system replaces the traditional connection methods for fixing this type of connections. Can be used for bonding and other profiles, saving time compared to conventional profiles switching means.Ideal for furniture manufacture adhesive bonding decorative details, thickening. Can be used as hidden clamp using an adhesive in combination with a cure time to perform more.
It is recommended to make the application between +5°C and +40°C . Surfaces must be clean and dry. Spreads evenly on surface of two joint material, after drying moderately, folds gathers with exerts pressure (for example spread 2~3 times for multi hole joint material).

The application adhesive could be achieved after drying for 24 hours at the room temperature of 25°C. The best adhesive performance is available after drying 48 hours.

Application：
1, Both surfaces to be bonded should be clean, dry and free of oil.

2, Carefully pierce end of tube by tightening the cap enclosed.
3, Apply carefully tc avoid spilling.
4, Apply on one surface. Only one drop per square inch.
5, Place in desireb position immediately. Apply sligh pressure for ten seconds or until bond sets.
6, Clean away the excess adhesive from finger or container with tissue paper.

Specification：
Two Component instant adhesive.
50ml cyanoacrylate, 200ml spray activator, or

100ml cyanoacrylate, 400ml spray activator,
Activator increases bonding strength by having absorbed onto the surface.

Caution:
KEEP OUTOF REACH OF CHILDRENIf in contact with eyes, flush with water, if swallowed, call physician immediately. in case of fingers bonded, do not try to force apart, soak fingers in water or remove by nai!polish. Store in dry and cool place.

Name	Super Glue MDF Kit
Density（g/ml）	1.0±0.1
Solid Content（%）	≥25±3
Viscosity（Mpa.s）	4000±500
Initial adhesion shear strength（Mpa）	≥0.8
Initial adhesion peeling strength（KN/m）	≥0.7
Shear Strength (After 48 hours)Mpa	≥1.95
Peeling Strength (After 48hours)KN/m	≥3.3
Curing time（hours）	24-48
Temperature resistance	-40℃~180℃

APPLICATION

COMPANY INTRODUCTION

ZHONGSHAN WELLCHANCE NEW MATERIALS TECHNOLOGY CO.,LTD

is a manufacturer over 15 years of OEM&ODM experience with all kinds of adhesives & sealants and packaging containers .is located in the Zhongshan ,Factory is in Shanxi and Zhaoqing Guangdong China.Depending on leading R&D technology,advanced management and complete service process,Our products are exported to more than 40 countries. We has advanced testing instruments and self-created production technology and equipment with 16 production lines for aluminum tubes and 10 production lines for plastic bottles. The annual production capacity of silicone reaches 180000 tons and other kinds of adhesives reaches 10000 tons. We provide all kinds of glue raw materials, packaging containers ,a variety of filling and packaging technology you need.Wellchance from excellent quality and service. Main products: 1.Silicone adhesive 2.Polyurethane adhesive 3.Acrylic adhesive 4.Epoxy adhesive 5.Solvent-based adhesive 6.Hot melt adhesive7.Water-based adhesives 8.Tapes 9.All kinds of adhesive surface primer,activator,debonder.etc.

R&D

PACKING&SHIPPING

CUSTOMERS & EXHIBITION

TEST REPORT

FAQ

Q1. Can I get a free sample? A1.Yes. Q2 .Can you accept OEM&ODM Service? A2.Yes.

Q3 .What is your terms of payment? A3. L/C,T/T...30%-50% deposit, balance before shipment.

Q4. How can you guarantee the quality? A4.We have strict QC system to check quality before delivery. Q5. what is the deliver time? A5.3-6 weeks after receiving the deposit