full automatic plywood production line with hot press

full automatic plywood production line with hot press

Six kinds of product innovation,

1) The electric cabinet

Get rid of the traditional pressure gauge , we use microcomputer ,manually /automatic controlled electric cabinet

1. increase the sensor device
2. when overpressure it will power off automatically
3. when the voltage is not stable it will power off automatically
4. when over time It will automatic power off too
5. when the ac contactor to seize up, it will power off automatically and protect itself

2) In order to protect the cylinder and the hydraulic system, we have increase four support bases in the bottom beam .

3) In the crossbeam , we have change the slider into roller , can decrease the frictional force .

4) In order to make the hydraulic oil more clean, on one hand we have increase the sealing ring in the hydraulic system ,on the other hand we using the pipeline without welding .

5) In order to make the machine more standard , we punch the platen instead of using lifting lugs when install the hot platen onto the upper beam.

6) New electric cabinet in new pressure scope , from 300v -550v, increase the scope work .

Model	Normal Pressure	Dimension of hot platen	Service opening	Power	Number of cylinders	Heating media
BY214*8/60(8)H	600T	2600*1400nn	80mm	7KW	6	Thermal oil or steam
BY214*8/63(7-10)H	630T	1400*2600mm	80mm
BY213*7/50(7-10)H	500T	1100*2250mm	80mm
BY214*8/16(6)H	160T	1300*2500mm	80_120mm
BY214*8/20(5)H	200T	1500*3000mm		5.5KW	10	Thermal oil or steam
BY214*8/10(1)H	100T	1400*2600mm		18KW
BY214*8/12(3)H	120T	1300*2500mm		37.5KW
BY214*8/20(6)H	200T	1400*4000mm		49.5KW

Main  Advantages:

1. The use of aircraft alloy tank side note,

2.Domestic of the art hydraulic system

3..PLC programmable control system so that it smooth,rapid closure,stable,effective and preloading

4.Hot platen : It is drilled from excellent carbon solid steel and it is high precision,

high strength and durable.It is manufactured on special worktable,

so as to keep the hot platen easy to operate.

5.Heating system : It can be heated by steam bolier,oil heater or electri oil heater.

The steam bolier is low in cost and suitable for common production,

yet it is high pressure vessels,so it should be operated carefully.

As to the oil heater,it is adjustable,safe, uniform temperature,energy saving and so on,yet it may cost much than steam bolier.

The electric oil heater is environmental protection instead of using coal or wood as it’s fuel,but it may cost lots of electric energy.

6.Hydraulic system : It is “Triple Filter”and it has excellent oil pump and electric motor.It uses right-angled one-way valve so that it can work smoothly.The pressure is adjustble.

7.Cylinder :It is worked through excellent CNC precision machine tool.It uses high quality oil envelop so as to avoid of oil leaking.

8.Control system : Microcomputer ,Manually/Automatic controlled.It can lift the hot platen,close the separation,add the pressure,

keep the pressure,keep time, descend the hot platen and so on.

The machine can make plywood,paricle board,chip board, fibreboard,decorative sheet,etc.