Autosali OBD Car Tracking Device With Fleet Monitoring OBD2 Mini Tracker GPS for Car Rental Telematics Mini Tracker

Category

Specifications

Working Voltage

DC 9V-36V

Working Current

22mA @12V
12mA @24V

Standard Sizes

51mm(L)*30.6mm(W)*29.5mm(H)

Net Weight

40g

Positioning Mode

GPS + Beidou

Positioning Accuracy

10 Meters (Test Data)

Communication Network

GPRS

Communication Way

TCP

Start Time

Cold: 38s
Warm: 28s
Hot: 2s

Working Temperature

-20℃~ +70℃

Humidity

20%-80%RH

Standby Battery

1 hour（100mA/h）

Warranty

1 Year

Functions

Description

Real-time Tracking

Upload the longitude and latitude information according to the time interval

AGPS

Support AGPS, Capture signal quickly

Power Down Alarm

When the power supply of the device is disconnected, an alarm is triggered

Low Power Alarm

Set the number of volts below the external power supply voltage through SMS command, and alarm the center number; Voltage range is 7 ~45, 0 means the function is off

Over Speed Alarm

When vehicle is over speed, device will upload an alarm to the server

GEO-fence Alarm

Support GEO fence settings, vehicles entering and leaving the fence trigger an alarm

Voice Monitoring

Support voice monitoring, the phone dials the SIM card number on the device to monitor the sounds around the device.

Vibration Alarm

Support device vibration alarm, control switch and vibration sensitivity through SMS commands

Anti-dismantle Alarm

Support anti-dismantle alarm, equipment removal, trigger alarm, the function is the same as power down alarm

Blind Area Data Updating

The data is stored up to 300pcs. if the terminal is located and not online,upload this data when the signal is good

EPO Assisted Positioning

The terminal supports the EPO assisted positioning function to enhance the positioning effect

Inflection Data Updating

When the angle of the vehicle turns is more than a certain angle, the device will upload a position information to the platform to optimize the trajectory