NaN / 0

Micro OLED Display, 0.49" 64x32 OLED Micro Display Module LCD display

Get Latest Price

US$ 4

≥5 Pieces

Quick Details

Type:

PMOLED

Display Size:

0.49 inch

Place of Origin:

Jiangsu, China

Brand Name:

Winstar

Structure:

COG

Size:

0.49" OLED

Dot Matrix:

64x32

Driver IC:

SSD1306

Duty:

1/32

Interface:

I2C

Display Color:

White / Yellow / Sky Blue

Product Details

Description

Winstar OLED WEO006432A is a 0.49 inch passive matrix micro OLED display module which is made of 64x32 dots. The WEO006432A has the module dimension of 14.5x 11.6 x 1.26 mm and Active Area size 11.18 × 5.58 mm. WEO006432A OLED micro display is built in with SSD1306 IC, it supports I2C interface, 3V power supply. The WEO006432A is a COG structure OLED display which is ultra thin and no need of backlight (self emitting); it's lightweight and low power consumption. This 0.49 inch small sized OLED module is suitable for wearable device, mp3, portable device, personal care appliance, voice recorder pen, health device, etc. WEO006432A module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

DRAWING

Data source ref: WEO006432AWPP3N00000

SPECIFICATIONS

Interface Pin Function

No.	Symbol	Function
1	C2N	Positive Terminal of the Flying Inverting Capacitor Negative Terminal of the Flying Boost Capacitor The charge-pump capacitors are required between the terminals. They must be floated when the converter is not used.
2	C2P
3	C1P
4	C1N
5	VBAT	Power Supply for DC/DC Converter Circuit This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used.
6	NC	No connection.
7	VSS	Ground of Logic Circuit This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground.
8	VDD	Power Supply for Logic This is a voltage supply pin. It must be connected to external source.
9	RES#	Power Reset for Controller and Driver This pin is reset signal input. When the pin is low, initialization of the chip is executed.
10	SCL	Host Data Input/Output Bus When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK. When I2C mode is selected, D2 & D1 should be tired together and serve as SDAout & SDAin in application and D0 is the serial clock input SCL.
11	SDA
12	IREF	Current Reference for Brightness Adjustment This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current lower than 12.5μA.
13	VCOMH	Voltage Output High Level for COM Signal This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and VSS.
14	VCC	Power Supply for OEL Panel This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used.

Mechanical Data

Item	Dimension	Unit
Dot Matrix	64 × 32	Dots
Module dimension	14.5 × 11.6 × 1.26	mm
Active Area	11.18 × 5.58	mm
Pixel Size	0.153 × 0.153	mm
Pixel Pitch	0.175 × 0.175	mm
Display Mode	Passive Matrix
Display Color	Monochrome
Drive Duty	1/32 Duty
IC	SSD1306

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Supply Voltage for Logic	VDD	0	4	V
Supply Voltage for Display	VCC	0	15	V
Operating Temperature	TOP	-40	+80	°C
Storage Temperature	TSTG	-40	+85	°C

Electronical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage for Logic	VDD	-	2.8	3	3.3	V
Supply Voltage for Display	VCC	-	7	7.5	7.8	V
Input High Volt.	VIH	-	0.8×VDD	-	VDDIO	V
Input Low Volt.	VIL	-	0	-	0.2×VDD	V
Output High Volt.	VOH	-	0.9×VDD	-	VDDIO	V
Output Low Volt.	VOL	-	0	-	0.1×VDD	V
50% Check Board operating Current	ICC	VCC=7.5V	-	5	20	mA