HDMI To DVB-T HD RF Modulator over Coaxial cable Digital TV Modulator

HDMI To DVB-T HD RF Modulator over Coaxial  cable Digital TV Modulator

Model: HR-011

FEATURES:
Supports a HDMI input and a F type/BNC RF output.
Support HDMI resolution up to 1080P/60Hz.
Output signal accord with the relevant DVB-T standards, and it can be compatible with any DVB-T
TV or receiver.
Transmission distance up to 500 meters by RG59 coaxial cable and no need amplification.
Support 80 channels for option; frequency ranges 139MHz~950MHz.
Products using the broadcast signal transmission mode, only one line can transmit 48 channels of
high-definition video signal at the same time.

By a CATV network mixer,the Modulator over Coaxial cable supports pair to pair and multiple to
multiple video matrix.
The use of digital TV communication protocol, anti interference and error correction capability is very
strong.
Installs in minutes. The use of the existing CATV transmission network, no need wiring.
By using a special receiver, you can decoding DVB-T signal and output HDMI HD signal for non
DVB-T TV/Monitor.

Items	Specifications
TX Max working current	650mA
HDMI resolution	24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
HDMI Audio Format	LPCM
RF frequency range	139~950 MHz
RF Channel B/W	7/8 MHz
The number of Channel	80
RF Output power	-6dBm
RF Connector type	The imperial F type/BNC
Coaxial cable Characteristic impedance	75Ω
Coaxial cable types	RG59 etc.
RF transmission distance	≤500m RG59 coaxial standard cable
Power adapter format Input	AC 100V~240V 50HZ/60Hz, DC5V/2A
Operating Temperature range	-10 to +45℃
Storage Temperature range	-20 to +60℃
Operating Humidity range	10 to 90%RH (No Condensation)
Storage Humidity range	5 to 95%RH (No Condensation)
Case Dimension (L x W x H)	94x74x28 (mm)
Weight	120g

PWR LED: POWER ON/OFF indicator
HDMI LED: HDMI input indicator
HDMI IN: HDMI signal input
DC5V: 5V DC in jack

CHANNEL: Channel selection switch
RF OUT: RF signal output

Ⅰ. Pair to Pair mode

1. Connect one RG59 coaxial cable from Modulator (TX) RF OUT into the DVB-T Receiver Tuner /RF
IN.
2. Connect one HDMI cable from signal source into the HDMI input port of TX.
3. Set same channel for TX and Receiver (Detailed setting method reference behind the table).
4. Connect adapter power supply to the TX.

One to multiple Splitter mode

1. Connect one RG59 coaxial cable from TX RF OUT into the input port of CATV mixer.
2. Connect coaxial cables from DVB-T Receiver RF IN into the output ports of CATV mixer.
3. Connect one HDMI cable from signal source into the HDMI input port of TX.
4. Set same channel for TX and Receiver (Detailed setting method reference behind the table)
5. Connect adapter power supply to the TX.

6. Note: The CATV mixer and Special receiver are not included in the package list, you need to buy another.

Multiple to Multiple Matrix mode

1. Connect RG59 coaxial cables from TX RF OUT into the output ports of CATV mixer.
2. Connect coaxial cables from DVB-T Receiver RF IN into the output ports of CATV mixer.
3. Connect input ports of two CATV mixers with one RG59 coaxial cable.
4. Connect HDMI cables from signal source into the HDMI input port of TX.
5. Set same channel for TX and Receiver (Detailed setting method reference behind the table)