Sillicon rubber o rings FKM FFKM O-ring seals

Sillicon rubber o rings FKM FFKM O-ring seals

Product Description

Construction of rubber o rings:

Normally, rubber o rings  sizes are specified by the inside diameter (ID) and the cross section diameter (CS),  and AS568, ISO3601 and JIS standard size and customized size are available.

Material introduction:

O ring's Material could be NBR, HNBR,XNBR,EPDM, VMQ,CR,FKM,AFLAS,FVMQ,FFKM,PTFE,PU,ECO,NR,SBR,IIR,ACR etc.

And here is material property for your ref.

Topseals's fluorocarbon (FKM, FPM) O-rings are compatible with oils and gases, hydraulic oil and fuels.

Topseals's hydrogenated nitrile (HNBR, HSN) O-rings are very compatible with oils and gases

Topseals's ethylene propylene rubber (EPM, EPR, EPDM) O-rings are compatible with solvents and other chemicals.

Topseals's silicone (VMQ) O-rings are very compatible with PFPE, cold water, and ozone.

Topseals's polychloroprene rubber (CR) O-rings are compatible with oils and gases.

Topseals's perfluoroelastomer ( FFKM) O-rings are very compatible with hydraulic oil and fuels.

Topseals's nitrile rubber (NBR) O-rings are very compatible with oils and gases.

Topseals's fluorosilicone (FVMQ) O-rings are very compatible with oils and gases.

Main material property:

FFKM perfluoroelastomer compounds are has excellent high temperature resistance and chemical resistance as PTFE, but also retains the relevant properties of rubber elastomer. It can be used continuously at 260 ° C to 300 ° C and at a high temperature of 325 ° C in a short time. Such excellent performance makes it widely used in military industry, aerospace, semiconductor, medicine, electronics, chemical industry and other fields.

FKM compounds are widely used in chemical, automotive, aerospace and industrial applications, Fluoroelastomer (Viton®, FKM) offers a wide range of resistance to chemicals, oil and heat, with situational service life above 200°C, with Excellent mechanical properties. Good extrusion resistance. Chemical and heat resistant.

NBR offers relative low cost, good mechanical properties, and resistance to many common oils, fuels and lubricants. NBR has poor resistance to weathering, sunlight and ozone so it is best used in enclosed environments where parts are not exposed to the elements.

HNBR Hydrogenated versions of NBR (HNBR) have enhanced mechanical properties as well as greater thermal and chemical stability. Specific physical properties and chemical resistances vary by compound formulation.

Silicone are excellent seal materials for extreme temperature in static applications. Outstanding flex and fatigue life, very good for ozone and UV radiation, insulating properties, and physiologically neutral. silicones can be synthesized with a wide variety of properties and compositions.

PTFE with Best chemical compatibility, low friction, meets Food grade, USDA and 3-A dairy requirements, excellent moisture resistant and good cryogenic capabilities down to -350° F. Could be applied in Seals, bushings, back-ups, guides, pads, plugs, rollers, spacers, o-rings, wear rings, washers.

Product Picture

Material Feature