Shijiazhuang Huanpai Machine Co.,Ltd is a professional manufacturer of all types of animal feed pellet machine.
We are specialized in designing and manufacturing poultry feed,aquatic feed pellet machinery,biomass pellet machinery and the complete production line(all auxiliary equipment) with CPM advanced technology.
The current products include: hammer mill, ingredient weighing system, mixer, pellet mill, counter-flow cooler, dryer, crumbler, rotary screener, liquid adding equipment, pulse filter equipment, horizontal and vertical conveying equipment, links and gates, permanent magnet cylinder, and de-iron equipment etc.
1. It can crush all kinds of granular feed materials, such as corn, sorghum, wheat, soybean meal, bran, beans, etc., and also can crush high-fiber materials such as forage grass and straw.Note: the yield of crusher is under the condition of crushing grain.
2. The base is welded with steel plate with reasonable structure. The motor and rotor are installed on the same base.
3. The main transmission bearing is Japanese NSK bearing and Swedish SKF bearing.
4. The rotor of the crusher is tested by high-precision dynamic balancing machine.During the operation of the crusher, there is no vibration and the noise is within 90 db.
5. The operating door is interlocked with the motor. When the operating door is misoperated during operation, the motor will stop rotating.
6. The gap between hammer pieces and screen pieces, the number of hammer pieces and the motor speed can be adjusted according to different materials.
|
Model
|
Total Power(kw)
|
Outputs(t/h)
|
Floor Area(m)
|
|
(L×W×H)
|
|
|
|
|
SFSP56×30
|
11
|
1-2
|
1.4×0.79×1.1
|
|
SFSP56×36
|
22
|
2-4
|
1.5×0.79×1.1
|
|
SFSP56×40
|
37
|
4-6
|
1.61×0.79×1.1
|
1.SZLH series type granulator with the international advanced level, the latest technology, low failure models.
2.On the basis of the A type ring mould granulator, the feeding of the raw material is controlled by the variable speed motor, the feeding is uniform and convenient.Transmission parts using high-strength belt drive, smooth operation, low noise.
3.Rotary parts of the selection of high-quality bearings, to ensure high-speed rotation stability.The addition of a permanent magnet to the cutting part of the device, increasing the service life of the main components while reducing the same type of auxiliary equipment.
4.Easy operation, reliable sealing, high production efficiency, low energy consumption, low labor intensity.
1. Countercurrent cooling principle is used to cool the particles with high temperature and high humidity, avoiding the quench phenomenon caused by direct contact between cold air and hot material, thus preventing the surface cracking of particles. Meanwhile, the cooling effect is significant due to the large air inlet area of the closed-air feeder.
2, the use of sliding valve reciprocating discharge mechanism, smooth movement, reliable, small residual;
3. Low energy consumption and easy operation;
4. After cooling, the temperature of finished products should not be higher than room temperature +3℃ ~ 5℃;
5. Suitable for the cooling of granular materials.
Table of main technical parameters and performance indicators
Table of main Technical Parameters and Performance Index
|
Model parameters
|
SKLN1
|
SKLN2
|
SKLN4
|
|
The cooling capacity(m³)
|
1
|
2
|
4
|
|
Production capacity(t/h)
|
2
|
4
|
10
|
|
Cooling time(min)
|
No less than10-15
|
|
|
|
Material temperature after cooling
|
No higher than room temperature3-5°C
|
|
|
|
Suction air(m³/min.t)
|
34
|
|
|
|
With the power(KW)
|
0.75
|
1.1
|
1.5
|
|
Fan power off(KW)
|
0.55
|
0.55
|
0.75
|
1. Wide applicable scope
It can process different materials such as corn, maize, grass, grain, SBM, MBM, alfalfa, molasses, straw, and some other raw materials.
2. Complete feed pellet process
Animal feed pellet production line contains receiving and cleaning, grinding, batching and mixing, pelletizing,cooling,
crumbling ,screening and packing pellets parts. Full line
contains crusher, mixer, pellet mill, cooler,crumbler,cooler and all bins, screener,packing machine conveyors etc.We will design the full pellet line flow chart according to your
raw materials and specific requirement.
3. Good quality finished feed pellets
Stainless steel conditioner extends the conditioning and cooking time. Axial steam spraying port, improving feed
cooking efficiency.
4. High efficient feed machines
High precision driving main gear and pinion shaft adopt the carbonizing quenching and hard tooth surface grinding
technology, resulting in smooth driving, low noise and long service life.
5. Customized Capacity:
We can customize the different capacities from 1 ton per hour to 50 ton per hour or even more.
6. Different kinds and size of feed
We can customize solution of producing mash feed, pellet feed, crumble feed for you. The size of pellet feed can be 1.5mm to 18mm.
Our products are exported to more than 30 countries in the world. For example: Australian, America, Algeria, Angola, Burkina Faso, Belgium, Canada, Congo, Cameroon, Ghana, Egypt, Philippines, Libya, Zambia, Kenya, Ethiopia, , Yemen, Malawi, Tanzania, Tajikistan, Afghanistan, Vietnam, Israel, Mozambique, South Africa, Sudan, Somalia, Togo, Uganda, Uzbekistan, Tajikistan, Rwanda, Kazajastan and other country.
An experienced engineer will be send to project site to ensure the successful completion of each phase of the plant, which enables us to provide professional consultation, design, manufacture, installation and project management services.
|
Contact person:
|
Hussein Ali
|
|
|
||
|
Mobile/ WhatsApp:
|
+86 13722990009
|
|
|
||
|
Tel:
|
+86 311 87820292 Fax: +86 311 87820202
|
|
|
||
|
Email:
|
huangpai413 (at)126.com
|
|
|
||
|
|
flourmill123 (at) gmail.com
|
|
|
||
|
Web:
|
www.huanpaimachine.com
|
|
|
||
