Manual Steel Wire Rod Rebar Cutting Machine 32MM Bar Cutting Machine iron bar cutter

Product Description

Factory direct supply Manual Steel Wire Rod Rebar Thread Cutting Machine 32MM Thread Bar Cutting Machine

Rebar cutter is efficient machine used for bend low-carbon steel including round steel, steel flats, steel angles, and deformed steel bars into various shapes at construction sites and construction steel processing factories.

FEATURES
1. High-strength spheroidal castings for the cabinet

2.Internal gears, gear shafts, connecting rods, etc. are made of carbon steel or alloy steel.

3. High-quality heat treatment of important  parts

4. Large iron box switch

5.Thickened blades for long life

6.Sealed wheeled cover for safe

7.Reinforced blocker

8.Thickened casters

9.Upgraded spring with lever can be operated manually

10. Large end cap with multiple points fixed, integral connecting rod and cam type crankshaft, convenient for maintenance and repair

ADVANTAGES:

1. Small size, good quality, compact structure, firm and reliable.

2. Good lubrication performance:

Adopt box-type closed structure, gear splash lubrication, in turn, continuous                        operation can be used for more  than a month. < The oil level should not be

lower than the oil mark scale line, so that the machine is always in good                             lubrication>

3, The less function wear :

Due to improved lubrication conditions, the gear shaft end uses rolling bearings, compared with the same type of cutting machine ,power can be reduced by one third.

4, Easy to move:

Front wheel steering, flexible, easy to maintain.

5, The spare parts of the machine

weighted casing, thickened side cover, grease-regulating crankshaft, grease-regulating crankshaft wheel, forge tool holder, weighted connecting rod, copper crankshaft, GB 3KW motor, full-shield ,  clutch sleeve, weighted casters, thickened upper cover with tool box, 20A Delixi electric with thermal relay, V-belt, bearing, thickened blade, thickened knife clip, cutter, plated dual-use clutch Pole.

TECHNICAL PARAMETER

Name	GQ40A	GQ40B	GQ40BS	GQ42C	GQ42CS	GQ50B	GQ50BS
Deformed steel bar (σb≤650Mpa )	6-28 mm	6-32 mm	6-32mm	6-36mm	6-38mm	6-38 mm	6-40 mm
Blade size	83*83*26mm	83*83*26mm	83*83*26mm	83*83*26mm	83*83*26mm	90*90*26mm	90*90*26mm
Thickness of the shell	180mm	200mm	200mm	200mm	200mm	220mm	220mm
Continuous cut-off times	28times/min	28times/min	28times/min	32times/min	32times/min	32times/min	32times/min
Motor power	3KW	3KW	3KW	3KW	3KW	4KW	4KW
Rotational speed of electric motor	2880r/min	2880r/min	2880r/min	2880r/min	2880r/min	2880r/min	2880r/min
Voltage	380V	380V	380V	380V	380V	380V	380V
Dimention	1200*430 *670mm	1200*430 *670mm	1200*430 *670mm	1300*530 *750mm	1300*530 *750mm	1500*480 *850mm	1500*480 *850mm
Net weight	330kg	400kg	420kg	450kg	470kg	520kg	540kg

Technology

Related Products