Product Description

The material used is self-adhesive polymer multilayer composite, the back glue of the material is independently developed by our company and obtained the national patent certificate .This material allows you to deal with waterproofing,rust prevention, cold and the heat  insulation.

1. Ordinary roofs in disrepair, the surface of the roof will be rusted, corroded, aging, rust leakage, etc. The use of this product can effectively renovate the roof and prevent the aging problem of metal roof.

2. After using it, it will have a significant waterproof, sound and thermal insulation effect, avoids direct ultraviolet rays, rain acid directly hit the metal roof, etc., so as to extend the service life of the roof.

3. During the construction process, it does not affect the indoor production operation, and you can still walk around it after the construction is completed, without fear of stepping on it.

4. Heat insulation in summer: It can block the outdoor heat source, bring a comfortable working environment to the interior, effectively reduce the electricity consumption of air conditioning, and reduce expensive electricity expenses.

5. Heat preservation in winter: It can prevent indoor temperature leakage. It is not necessary to use an electric heater (or use for little time) to achieve the effect of heat preservation. This can bring energy saving and low carbon environmental protection to the social environment.

D irection for Use:

1. Clean the roof from dirt and mud and keep it dry.

2. To install from the lowest place in eaves .

3. Tear off the back film

4. Press membrane from center to both sides

5. Tear off the rest part of  the isolation film

6. Press down with feet

7. The upper and lower membrane are better overlap each other by       10CM

8. If there is a raised part,a second piect is needed to cover the               corrugated rased part.