seedling tray machine Seeding planting machine,Plug seedling machine

1 This machine adopts fully automatic control, high precision and easy operation.

2 Suitable for a variety of vegetables, flower seeds between 0.5 and 8 mm in diameter.

3 Automatic simultaneous seeding is suitable for all kinds of trays (non-standard can be customized).

4 uses stepless speed change. Good adaptability.

5 Unique optimized airflow matching technology, uniform speed of suction and seeding.

6 This machine selects the appropriate vibration frequency to help the seed germination.

Main parameters:

Frame size:1100*900*1100mm
Machine quality: 150KG
Power:0.3KW
Voltage:220V/110V
Working Efficiency:800-1200 Disc/Hour
Noise: less than 100 decibel
Tray size: 540*280mm
Number of holes: 32, 50, 72, 105, 128，200

1. Install the suction plate, remove the baffle, remove the machine head, and install the seeding plate (the screws are all screwed on) to ensure the installation is flat.
2. Connect the 220v power supply, turn the switch on, and hear the working sound of the fan.
3. Find the best matching needle based on the different seeds.
A, select several kinds of suction heads (needle), insert into the suction plate (8-10)
B, take a small amount of clean and impurity-free seeds (if the impurities are too much, the purity is not high, it is easy to block the suction head),test whether it can be sucked, put a small amount of seeds into a small container, turn on the machine switch, the fan works, and test the best matching needle.
C, each sucker head is guaranteed to suck a seed. If it can't be sucked, the needle is small. If you suck a few, the needle is big.
D, test the needle and find the best matching suction head (needle).
F. After finding the appropriate seed head, according to the number of needles on the suction plate, all the forks are sucked on the head (the baffle can be removed, the machine head is removed, and the baffle is installed after completion.
4. Put the appropriate amount of seeds in the seed tray (if the seeds are larger, or the amount is more, you can directly put the seeds in the seed tray to take seeds such as: soybeans, peas, corn, watermelon, etc.) Place the matching trays in the seed tray or place them in the precision suction hole. Seeds are placed in the plugs (or precision sucking holes) so that the seeds are concentrated when sucking and easy to suck.
5.  Flowers and other smaller, lesser seeds, combined with precision suction and aspiration.
6. Put a rubber sleeve on each of the suction heads (use the needle to tie the eyes), expose the needle, and the rubber sleeve will prevent the needle from being clogged and the seeds running away when the substrate is inserted. It acts as a pressure point. After the pressure is completed, after the seed is taken in the seed tray, adjust the sowing depth screw so that the seed falls in the hole of the pressure hole, and do not insert the substrate to avoid clogging the needle.
7. Place the seed tray in place, rely on the baffle (the baffle is attached to the outside of the machine), and press the head to suck the seed.
8. Move the handpiece to the left and place the handle on the substrate-mounted tray. Press the handle.
9. Open the venting port, deflate, insert the seed into the matrix or drop into the hole of the pressed hole to complete the seeding.
10. Repeat the above actions to complete the production.
11. Sprinkle the soil in the well-planted tray (after the pressure hole), if the seed is not inserted into the substrate, sprinkle water.