df31d90132013098886922cd70dc26bd.png
34a259539b0632b6b3d22fd40e8083cf.png
ee5e0b77e5da3054a5cdec3a6fb85d72.png
5e232fcde51838ddb10c4b351d4e84da.png
NaN / 0

Skyplant Gas Electronic Carbon Dioxide Burner Hydroponic 4 Burners CO2 Generator

Get Latest Price
US$ 280
≥1 Sets
US$ 250
≥10 Sets

Quick Details

Size:
Large
Type:
Solar Agricultural Greenhouses
Manufacturer:
Co2 Generator For Greenhouse
Instruction for use:
Co2 Generator For Greenhouse
Product Details
Product Description

!!WARNING!!

In closed spaces without adequate ventilation, CO2 levels can accumulate and become toxic(CO2 levels above 5000 PPM are toxic).Plants benefit from levels up to 1500 PPM. Levels above 2500 PPM can cause headaches and /or other feelings of being ill.Determine the best location for the generator. It must be placed in an area that is adequately ventilated.
Specially designed for indoor garden, Application: Indoor garden, grow room,hydroponic garden Propane or Natural Gas available,4 burners, 8 burners and 10 burners available Constructed high temperature resistance and powder-coated steel Electronic Spark Ignition - No pilot light necessary Safety "tip-over" switch shuts down Propane or natural gas in case the CO2 generator falls or gets knocked over.
Skyplant Gas Electronic Carbon Dioxide Burner Hydroponic 4 Burners CO2 Generator
Specification
Name
Greenhouse CO2 generator
model
AM-06A
AM-05
AM-12
voltage
AC220V
AC220V
AC220V
Gas production
1100g/h
1100g/h
2500g/h
power
1100W
900W
1800W
Applicable area
≤667m2
≤667m2
1500m2
Unit packing size
35*90cm
35*90cm
35*90cm
N.W/G.W
13KG/15KG
13KG/15KG
13KG/15KG
Skyplant Gas Electronic Carbon Dioxide Burner Hydroponic 4 Burners CO2 Generator
Skyplant Gas Electronic Carbon Dioxide Burner Hydroponic 4 Burners CO2 Generator
Setup & Operation Instructions
Skyplant Gas Electronic Carbon Dioxide Burner Hydroponic 4 Burners CO2 Generator
Step 1: Loosen the 2 wing bolts on each side, raise the top upward.
Step 2: Tighten the bolts at the top limit. Install two stand feet when you need to place it on the ground.
Step 3: Connect the supplied hose to the gas source and generator. Verify that the gas supply matches the CO2 generator model (LP or NG), and check thoroughly for any gas leaks at the connection points using soapy water. Plug in the 24V power supply
Step 4: Turn the power switch to the ON position. The green 'MAIN POWER ON' LED should be illuminated. The intelligent ignition module will then attempt to ignite the burners. If the burners ignite properly and maintain a flame, the green 'MAIN VALVE ON' LED should remain illuminated.The yellow 'PILOT VALVE ON' LED indicator should also remain illuminated (for 10 burner units only).
Recommend Products