EC380V-2.5KW built-in non-electrolytic motor driver (PlATE)

Product category:                                                                                                                                                      Industrial inverter controller - Industrial fan drive controller

I. Technical parameters
1. Rated working voltage range: 380Vac±20% 50~60HZ.
2. Rated input power: 2.2kW.
3. Rated operating environment temperature: -40℃~65℃.
4. Control mode: 180 degree sine wave control.
5. Protection method: the whole filling glue, the exposed part of the main control board is coated with UV glue.
6. Speed range: 200~980rpm.
Ii. Function introduction
1. Power over-voltage protection, motor phase line over-current protection, power parts over-temperature protection, power phase protection, motor phase protection and other fault protection functions.
2.485 Communication control function: Baud rate 9600 can be customized according to customer communication protocol.
3.VSP speed control function: 0~10V.
4. Supports PWM speed control and 0 to 20mA speed control.
5. Support LED light indication and error switch signal output.
Iii. Product characteristics
1. Adopt three-phase non-electrolysis scheme

Ⅳ. Typical applications
The product is mainly used in fan system

Replenishment

① 180 degree sine wave, no position sensor, FOC control scheme
② Compatible with various fan loads, with low noise, low vibration, high efficiency and other advantages
Mature closed-loop forward and reverse wind start-up, automatic air volume calibration, harmonic compensation, carrier jitter, SVPWM overmodulation, dead zone compensation, beat suppression technology
③ Perfect PFC hardware and software solution, three-phase no electrolysis solution, low noise single resistance solution
Constant speed, constant torque, constant power, constant air volume and other control modes, current, voltage, temperature limit power and other strategies
④DC12V-540V voltage input, AC110V/220V/380V/480V voltage input, series product power range 10W-10KW, products meet CE, UL, CCC, TUV, ETL certification requirements
⑤ Perfect protection mechanism: AC and DC over-voltage, software and hardware over-current, phase loss, out-of-step, overheating communication failure