NaN / 0
A set RC522 MFRC522 RFID RF IC Card Reader Proximity Sensor Induction Module MFRC-522
Get Latest Price
US$ 0.75
≥1 Pieces
US$ 0.72
≥50 Pieces
US$ 0.7
≥200 Pieces
US$ 0.67
≥2000 Pieces
Quick Details
Place of Origin:
Guangdong, China
Brand Name:
JUBAOLAI
Model Number:
MFRC-522
Lead time:
In stock
Product Details
A set RC522 MFRC522 RFID RF IC Card Reader Proximity Sensor Induction Module MFRC-522
Product Description
|
Product Attributes
Shipping list 1. One module of RFID-RC522; 2. Standard S50 blank card; 3. S50 special-shaped card (as shown in the figure of the key button shape); 4. One straight and one curved insertion needle; Introduction of RC522 Chip MF RC522 is a highly integrated read-write card chip used in 13.56MHz contactless communication. It is a low-voltage, low-cost, small-size non-contact read-write card chip launched by NXP company for "three meters" application. It is a good choice for the development of intelligent instruments and portable handheld devices. MF RC522 utilizes advanced modulation and demodulation concepts and fully integrates all types of passive contactless communication modes and protocols at 13.56MHz. Support 14443A compatible transponder signal. The digital part deals with ISO14443A frames and error detection. In addition, it also supports fast CRYPTO1 encryption algorithm to validate MIFARE products. MFRC522 supports MIFARE series of higher-speed contactless communications, with bidirectional data transmission rates up to 424 kbit/s. As a new member of the 13.56MHz high integration read-write card family, MF RC522 has many similarities with MF RC500 and MF RC530, but also has many characteristics and differences. The SPI mode is used for communication between PCB and host computer, which is helpful to reduce the connection, the volume of PCB board and the cost. Brief Introduction of RFID Module MF522-AN module uses Philips MFRC522 original chip to design card reading circuit. It is easy to use and low cost. It is suitable for users of advanced applications such as equipment development and card reader development, and users who need to design/produce radio frequency card terminals. This module can be directly loaded into various card reader dies. The module uses a voltage of 3.3V, and can communicate directly with any CPU motherboard of the user through a few simple lines of SPI interface, which can ensure the stable and reliable operation of the module and the long distance of card reading. Brief Introduction of Electrical Parameters Working current: 13-26 mA/DC 3.3V Idle current: 10-13 mA/DC 3.3V Dormancy Current: <80uA Peak current: <30 mA Working frequency: 13.56 MHz Supported card types: Mifare 1 S50, Mifare 1 S70, Mifare UltraLight, Mifare Pro, Mifare Desfire Product Physical Characteristics: Size: 40mm *60mm Environmental working temperature: 20-80 degrees Celsius Environmental storage temperature: 40-85 degrees Celsius Environmental Relative Humidity: Relative Humidity 5%-95% Module Interface SPI Parameters Data transmission rate: maximum 10Mbit/s |
One-stop BOM service
Related Products
30%
