2 Gallon (7.6 L) | Art & Craft Epoxy Resin Kit Free Sample Clear Casting Epoxy Resin Cover Art

Unmatched Qualities of Liquid Glass Deep Pour Epoxy Resin

Deep Pour 2”- 4” Inches Plus!
Not only can you pour Liquid Glass Deep Pour Epoxy thicker at 2-4 inches and higher, but it is harder, to protect it from damage,
more heat resistant to prevent warping, and more stable, to provide a strong structure with no flexing.
These attributes are what differentiates Liquid Glass from the competition! You’ll find nothing more clear, harder or more
workable!

Practically Bubble-less Crystal Clear Finish
Our Liquid Glass Deep Pour Epoxy resin kit is a two part epoxy, and has a thinner viscosity with bubble releasing attributes that
assist in giving the finished product a practically bubble-less finish with unparalleled depth and clarity. Liquid Glass is
formulated to use within all casting applications such as: River Tables, Void Filling Live-Edge Tables, Casting Art, and Even
Small Jewelry Castings as Small as 4ml’s! If you have a small project like a ring mold or jewelry, make sure to mix up no less
than a pint at a time. If mixing less than a pint, it is much easier to mix the incorrect volumes, which is a common mistake,
leading to curing issues.

High-Grade UV Resistance
All epoxies will turn yellow overtime. What makes our Liquid Glass Deep Pour Epoxy different is our specific high-grade additive
formulations. Ours will yellow less and remain ultra-crystal-clear over a longer period of time than any of our competitors. Our
products are made for you, and made to last, bar none. .

OUR 2:1 FORMULA IS EASY TO MEASURE & EVEN EASIER TO POUR!
DIRECTIONS FOR USE:
Step 1: The ideal working temperature is around 77°F. Best results can be obtained at temperatures between 70°F and 85°F, in a
clean, dry, dust-free environment. Avoid working in high humidity. We recommend using this product on a leveled and flat work
surface.
Step 2: Measure product in accordance with your intended use. Prepare 2 parts Base Resin to 1 part Curing Agent by liquid volume.
Pour the Curing Agent first and then the Base Resin into a clean, smooth-sided container large enough to hold all the liquid and
allow room for mixing.
Step 3: The material must be mixed thoroughly for at least 6-8 minutes. Be sure to scrape the container sides, bottom, and corners
as you mix. Be careful not to whip excessive air into the mixture. If mixing a gallon, use a power mixer set to “hand speed.” For
smaller quantities, use stir sticks. Do not mix more than a gallon. Pour into a new, clean container and mix for an additional
minute.
Step 4: Pour the mixed resin onto the surface and distribute evenly with a squeegee or gloved hand. Continue to pour remaining
material to achieve the desired thickness, allowing the resin to flow evenly over the project’s sides. Resin can be poured up to
2” thick per pour, and up to 4” depending on the volume of the pour.
Step 5: Use a heat source such as a heat gun to remove any bubbles by adding a small amount of heat to the surrounding area. The
bubble will rise to the surface and pop.
Step 6: If you are going to make a second pour, the first pour should still be slightly sticky. Once the second pour is made,
bubbles may once again need to be removed. Material will feel hard after 48-72 hours, but full cure and maximum hardness can
require up to 7 days, depending upon the temperature.
PRO TIP: If you wish to apply paper decals or other objects under the JHX-318AB surface, those objects need to be bonded to
the surface either with JHX-318AB Epoxy or craft glue. Some wood may take the material well in a single coat; however, many types
of wood require a seal coat to prevent air bubbles from rising out of the wood and ruining the surface. Older, more porous pieces
of wood may contain both air and moisture that can contaminate the finish. In this case, the user may first paint on a very thin
coat of SuperClear Table Top Epoxy, allowing that to set before pouring the new layer.

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.