Price reduction gold metal detector underground imaging Long range large depth industrial metal detectors 3d gold detector under

Product information

Controller: Automatic rotation search
Operating temperature: 0-40 degrees Celsius
Audio systems: Visual and auditory
Weight: 1kg
Voltage: 12V

The Black Hawk gold detector series is an instrument for remote location of gold, silver, masonry, jade and gems, with high penetration depth detectors
how to use:

It is necessary to turn on the power switch of both the receiver and the transmitter, and then select the metal category according to the gear on the receiver. For example, press the gold gear and the gold light of the transmitter is on at the same time, and then adjust the sensitivity control knob on the receiver to select the sensitivity. The higher the sensitivity, the larger the depth range, the maximum is 1000*30 meters. Adjust according to its own environment, and then put the elements to be detected on the head of the launcher for adaptation to facilitate more accurate detection. Gold and silver are adapted to the head of the launcher gun, and jade, gem and diamond are adapted to the head of the soft body. After adaptation, the launcher will make a sound, and then the detection can begin.

Because the gold scanner 3d detector underground hand-held handle rotates freely, the wind can interfere with the GR-100. So the metal detector used in windy conditions will suffer from certain interference. The effectiveness of the device depends on how well the operator controls the scan.

Stand on the ground in a comfortable position, holding the bounty hunter metal detector in your hands, with your elbows firmly against your sides. Note: You must have the instrument in front of your body, allow enough room for the receiving antenna to unfold, and tilt the antenna down slightly from the horizontal line. The Angle is somewhere between 7 and 10 degrees.

1. As mentioned above, hold the best metal detector and scan it very slowly in an arc while rotating yourself. The elbows should always be firmly against the sides of the body and should be turned about 40 to 60 degrees. Note: The dowser must rotate slowly and keep his body steady

2. Standardize your scanning actions. First, let the receiving antenna be stretched out properly. Keep the receiving antenna directly in front of you, spread out at 90 degrees from your body, and cannot be deflected left or right.

3, when the antenna is aligned with the target, the instrument will lock, although you cross the target to continue to detect. When you feel that the lock is valid, you remember this direction. Then, move the hand held metal detector about 10 meters to the left or right, and repeat the locking process. Look at the locking direction this time. The intersection of the two directions is where the object is buried.

4. If you feel that the specific position you just measured has a certain offset, you can lock it from another Angle. If the target is within 10 meters or so, walk slowly and steadily along one of the designated routes. When you pass the object and are directly above it, the antenna of the gold metal detector swings to both sides. And that's when the location is very accurate