NaN / 0

stainless steel 4-20ma industrial high pressure digital liquid control electromagnetic flow meter water magnetic flowmeter

Get Latest Price

US$ 430

≥1 Pieces

US$ 350

≥10 Pieces

US$ 230

≥50 Pieces

Quick Details

Type:

Variable Area Water Flowmeters, Variable Area Petrolum Flowmeters, Variable Area Oil Flowmeters

Warranty:

1 years

Place of Origin:

Liaoning, China

Brand Name:

Honno

Model Number:

HWFB2

Product Name:

electromagnetic flowmeter

Flow Type:

Electromagnetic Type

Pipe diameter range:

DN10 - DN2600

Precision:

≤±0.25%FS (typical), ≤±0.5%FS (Max)

Output signal:

4-20mA, Pulse/Frequency 2kHz(Default), 5KHz(Max)

Level of protection:

Separate body-type IP68, IP65 Incorporate type IP65

Supply voltage:

110/220VAC (100-240VAC), 50Hz/60Hz; 24VDC±10%

Digital communication:

RS-485, support standard Mudbugs-RTU protocol; GPRS

Nominal pressure:

1MPa (DN15-DN800), 1.6MPa(DN15-DN800), 2.5MPa(DN15-DN600)

Sensor:

0℃- +80℃ or -25℃- +120℃ or +70℃- +250℃

Product Details

Product Overview

Digital electromagnetic flowmeter

HWFB1 intelligent industrial electromagnetic flowmeter is a kind of high stability measuring device with isolation and precision measurement. When the conductive liquid cuts the magnetic field line in the magnetic field, the inductive potential is generated in the conductor. When the flow rate is measured, the conductive liquid flows through the magnetic field perpendicular to the flow direction at the speed V. The conductive liquid flow induces a voltage proportional to the average flow rate, and the induced voltage signal is detected by two or more electrodes in direct contact with the liquid, and is sent to the converter through the cable through intelligent processing to achieve the instantaneous flow of fluid, accumulated flow display and communication between the flow data and the control system.

FEATURES AT A GLANCE

● Can measure the volume flow and mass flow of steam, gas and liquid. ● The amplifier can be separated from the sensor (separation distance 15m). ● Small pressure loss, wide range, range up to 10-40 times ● No mechanical moving parts, long-term stability, simple structure and easy to install and maintain. ● Measurable medium temperature up to +350℃ ● The output of the sensor is the pulse frequency, and its frequency is linear with the actual flow of the measured flow body, and the zero point has no drift, and the performance is very stable It is widely used to measure the volume flow and mass flow of superheated steam, saturated steam, compressed air and general gases and liquids

stainless steel 4-20ma industrial high pressure digital liquid control electromagnetic flow meter water magnetic flowmeter

PRODUCT SPECIFICATIONS

Product parameters
Brand Name	Honno
Property	Technical Parameter
Structural Form	Insert Type/Pipe Type
Measuring Medium	Common Steady-State Gases (Unstable Media Such As Acetylene And Boron Trichloride Can Not Be Measured)
Pipe Diameter Range	Dn65 To 4000mm /Dn10 To 300mm
Velocity Range	0.1 ~ 100Nm/s
Accuracy	±1 ~ 2.5%
Operating Temperature Sensor	-40 ~ +200℃ Converter: -20 ~ +45℃
Working Pressure	Medium Pressure ≤1.6Mpa /Medium Pressure ≤1.6Mpa
Power Supply	(Dc 24V Or Ac 220V)≤18W
Response Speed	1s
Output Signal	4-20ma(Photoelectric Isolation, Maximum Load 500 Euros), Rs-485(Photoelectric Isolation Needs To Be Customized)
Give An Alarm	1-2 Normally Open Contacts, 24V/0.5A
Type Of Supply	Integrated Structure
Pipe Material	Carbon Steel, Stainless Steel, Plastic, Etc
Field Display	Four Lines Of Chinese Liquid Crystal Display
Display Content	Mass Flow, Standard Volume Flow, Cumulative Flow, Standard Flow Rate, Etc
Class Of Protection	Ip65
Sensor Material	Stainless Steel/Stainless Steel

PRODUCT CONFIGURATION

^{Electromagnetic Flowmeter}

Heat Enables Mass Flowmeter

Vortex Flowmeter

SALES AND SERVICE NETWORK

Successful Project

Project in Thailand

Project in India

Project in Russia

SIMILAR PRODUCTS

FAQ

Q1. What is your terms of packing? A: Generally, ZHYQ brand colorful cardboard boxes packing.OEM brandbrown cardboard boxes
packing.
Q2. What is your trade terms & payment terms can you accept?
A: Trade terms : EXW, FOB, CFR, CIF for your convenient; Payment terms: 100% T/T or credit card or paypal advance before shipment
Q3. How about your delivery time?
A: Generally, standard type : 6-7 working days after confirm the order.non-standard type: 8-10 working days after confirm the
order.
Q4. What's your MOQ?
A: We have no MOQ demand, 1 piece for test purpose at first is acceptable.
Q5. How do you ensure good product quality?
A: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our
clients.
Q6.How long your quotation valid?
A: Our quotation valid for 12 months.
Q7. Can you accept OEM brand?
A: Yes, we can accept the OEM brand without extra charge.
Q8. How long is your product warranty?
A: 7 days replacement and 12 months repair free of charge for quality problem.
Q9. How delivery the goods?
A: We can send goods by DHL, TNT, UPS, SF, EMS for freight prepaid, also canuse your own courier account to do the freight
collect, just for your convenience.
Q10. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.