NaN / 0

Maydos neoprene contact glue neoprene chloroprene adhesive

Get Latest Price

US$ 1.6

≥1 Kilograms

Quick Details

CAS No.:

7085-85-0

Other Names:

Super Glue

MF:

Mixture

EINECS No.:

230-391-5

Place of Origin:

Guangdong, China

Brand Name:

Maydos

Model Number:

EC3000W

Type:

Adhesive

Packing:

0.7L, 1L, 3L, 4L, 15L, 18L and 200L

Dosage:

195-250g/m2

Application Tools:

Brush or scraper

Shelf Life:

18 months

Appearance:

light yellow viscous liquid

Viscosity:

2500-3500 MPa. S/25℃

Solids Content:

21%-23%

Specific Gravity:

0.80-0.90kg/L

VOC:

≤750 g/L

Color:

Yellow

Product Details

Products Description

Maydos neoprene contact glue neoprene chloroprene adhesive

Description

Maydos Spray Adhesive formulated with good-quality raw materials and
conforming to national compulsory standard-GB18583-2001 requirements of restriction of harmful and hazardous substance, possesses such features as low VOC,fresh smell, high solid content, good flexibility, easy application, strong adhesive force, environment-friendly etc. And after hardening, it can be resistant to damp,water, heat, acid, alkali and bumping, so it is widely used for bonding sponge, heat insulated materials, fiber, wood and thin metal sheet.

Recommended use
It is suitable for bonding different materials such as sponge, heat-insulated materials,
fiber, wood and thin metal sheet.

Technical Data

Appearance	light yellow viscous liquid
Viscosity	90±40 mPa. S/25°C
Solids Content	32±2%
Shear Strength	30 minutes ≥ 0.6 mpa 48 hours ≥ 1.0 mpa
Specific Gravity	0.78kg/L
VOC	≤ 200 g/L
Initial bonding power	≥0.6 Mpa

Feature

Features

1.Environmental: benzene free, no hazardous materials and additives and low VOC.
2.Best bonding effect can be achieved even under temperature around 60°C.
3.Fast drying speed and long viscosity-keeping time.
4.Strong bonding strength and good initial bonding power; water-proof and ageing resistant.
5.Easy application. It is easy to apply the adhesive evenly on the bonding surface and
no adhesive legging occurs.

Directions for use
Surface preparation
Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off.
Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere.
Recommended apply system
Spraying
Apply the adhesive evenly on the two bonding surfaces with spray gun and the consumption is 80 - 90g/m2. Spray gun with anopening of 2.0-2.5 mm and 0.3-0.5 Mpa air pressure is recommended.

Thickness control

The adhesive should be applied evenly and not too thick to avoid the weakening of the bonding strength. But for porous materials
or materials with coarse surface, you can apply more accordingly.
Airing
After application of the adhesive, enough time should be given to let the solvent evaporate completely to avoid bubble or stickiness. The airing time is about 5-15 minutes/25C and varies from the temperature, humidity and adhesive film. The bonding can be done after the surface is dry by touch. For porous materials, you can bond directly after application of the adhesive.
Bonding
The application should be done once and for all. Aim the two surfaces, bond together and press. Don’t move the bonding surfaces back and forth, or the bonding effect will be affected.

Remarks

1.Seal it tightly and store it in a cool and well-ventilated place where the temperature is between 5C -35C and the relative
humidity is ≤80%. Don’t expose it under the sun.

2.Volatile solvent contained. Do not swallow. Keep it far away from open fire because of volatile solvent in it which is
inflammable and out of reach of the children. The room should be well-ventilated during application.

3.No. of Regulation On Transporting Dangerous Goods: 32196