NaN / 0
MF898 silicone weather-resistant sealant RTV, neutral, one-component silicone sealant,Silicone sealant
Get Latest Price
US$ 4.22
≥10 Pieces
US$ 4.2
≥100 Pieces
US$ 3.8
≥1000 Pieces
Quick Details
CAS No.:
85-22-3
Other Names:
Silicone weather-resistant sealant
Place of Origin:
Henan, China
Brand Name:
SILANDE
Product Details
Product Description
This product is not allowed to be used as a structural glue, nor is it tested or stated as suitable for medical or medicinal.
This product is not suitable for:
1. Place of seams in groundwater or excessive friction
2. Long-term immersion in the water
3. May exude oil, plasticizer, solvent surface, or part of the vulcanized rubber gasket or tape
4. Frost or moist surface
5. When the cure is completely exposed to the air (the sealant needs moisture to curing)
6. Application of sealed glue surface (general paint can not be attached to silica gel surface)
7. Direct contact with food or other food grade surface applications
Limit
This product is not allowed to be used as a structural glue, nor is it tested or stated as suitable for medical or medicinal.
This product is not suitable for:
1. Place in groundwater or excessive friction.
2.Long-term immersion in the water.
3.May exude oil, plasticizers, solvent surfaces, or partially vulcanized rubber gasket or tape.
4. Frost or moist surfaces.
5. When curing, it is completely in contact with the air (the sealing adhesive needs moisture).
6. Application of sealing glue surface paint (general paint cannot be attached to the silica gel surface).
7. contact with food or other food grade surface applications.
This product is not suitable for:
1. Place of seams in groundwater or excessive friction
2. Long-term immersion in the water
3. May exude oil, plasticizer, solvent surface, or part of the vulcanized rubber gasket or tape
4. Frost or moist surface
5. When the cure is completely exposed to the air (the sealant needs moisture to curing)
6. Application of sealed glue surface (general paint can not be attached to silica gel surface)
7. Direct contact with food or other food grade surface applications
Limit
This product is not allowed to be used as a structural glue, nor is it tested or stated as suitable for medical or medicinal.
This product is not suitable for:
1. Place in groundwater or excessive friction.
2.Long-term immersion in the water.
3.May exude oil, plasticizers, solvent surfaces, or partially vulcanized rubber gasket or tape.
4. Frost or moist surfaces.
5. When curing, it is completely in contact with the air (the sealing adhesive needs moisture).
6. Application of sealing glue surface paint (general paint cannot be attached to the silica gel surface).
7. contact with food or other food grade surface applications.
Product Paramenters
|
TEST ITEMS
|
TECHNICAL DATA
|
TEST RESULT
|
STANDARD
|
|||
|
Test Conditions: T (23±2)°C, (50±5)% R.H.
|
|
|
|
|||
|
Density, g/cm3
|
—
|
1.40
|
GBfT 13477.2
|
|||
|
Droat, mm
|
≤3
|
0
|
|
|||
|
Extrusion Property, ml/min
|
≥80
|
380
|
GBfT 13477.3
|
|||
|
Tack-free Time, h
|
≤3
|
2.5
|
GB7 13477.5
|
|||
|
Curing Time, d
|
一
|
7~ 14
|
一
|
|||
|
Range of Application Temperature, °C
|
—
|
5-40
|
—
|
|||
|
Test Conditions: 28d placed at T (23±2)°C, (50±5)% R.H.
|
|
|
|
|||
|
Hardness, Shore A
|
20-60
|
35
|
GB/T 531.1
|
|||
|
Displacement capability, %
|
100/50
|
100/50
|
GB/T 22083
|
|||
|
Range of Temperature Resistance, °C
|
—
|
-60-180
|
—
|
|||
|
Modulus at 100% Elongation, MPa
|
—
|
0.3
|
GB/T 13477.8
|
|||
|
Elongation at Break, %
|
—
|
480
|
|
|||
|
Tensile Strength, Mpa
|
一
|
0.9
|
|
|||
|
Stretching
|
No destruction
|
No destruction
|
GB/T 13477.10
|
|||
|
Stretching after soaking
|
No destruction
|
No destruction
|
GB/T 13477.11
|
|||
|
Stretching after soaking and illumination
|
No destruction
|
No destruction
|
GB/T 13477.15
|
|||
|
Cold pull - thermocompression after bonding
|
100/50 No destruction
|
100/50 No destruction
|
GB/T 13477.13
|
|||
|
Circulating tensile bond
|
100/50 No destruction
|
100/50 No destruction
|
ASTM C719
|
|||
|
Elastic recovery rate, ％
|
≥80
|
94
|
GB/T 13477.17 |
|||
|
Weight Loss Rate, %
|
≤10
|
3.6
|
GB/T 13477.19
|
|||
|
Volume loss rate, %
|
≤10
|
4.5
|
|
|||
Packing & Delivery
Package
Plastic tube packaging: 592ml per tube; 25 tubes per box; Soft packaging: 20 per box, 20 per box
Storage and validity
Packing well products, can be stored in a cool, ventilated, dry, 2 months, using the "validity period" of the product packing.
Plastic tube packaging: 592ml per tube; 25 tubes per box; Soft packaging: 20 per box, 20 per box
Storage and validity
Packing well products, can be stored in a cool, ventilated, dry, 2 months, using the "validity period" of the product packing.
Details Images
Instructions
Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a glue gun to paint from the hose and coat it on the surface of the substrate. In order to increase the curing speed and achieve complete curing faster, the product can be sprayed uniformly and appropriately with subsequent connection operations.
Precautions
* After opening, it should be used up within days, otherwise it must be kept tightly sealed.
* Avoid contact with skin and eyes. In case of accidental contact, rinse immediately with plenty of water and consult a doctor ifnecessary; avoid contact with children; do not contaminate food, medicine or cosmetics. Foaming during curing, pay attention to check and clean the spilled glue.
* The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
* Recommended use conditions: temperature 15~35C, relative humidity 40%~80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure slowly, and the construction time will be shortened if the temperature and humidity are higher than the recommended upper limit.
Remove dirt, dust, oil, frost, etc. on the surface of the substrate; place the plastic nozzle on the open bottle mouth and tighten it, and use a glue gun to paint from the hose and coat it on the surface of the substrate. In order to increase the curing speed and achieve complete curing faster, the product can be sprayed uniformly and appropriately with subsequent connection operations.
Precautions
* After opening, it should be used up within days, otherwise it must be kept tightly sealed.
* Avoid contact with skin and eyes. In case of accidental contact, rinse immediately with plenty of water and consult a doctor ifnecessary; avoid contact with children; do not contaminate food, medicine or cosmetics. Foaming during curing, pay attention to check and clean the spilled glue.
* The heavy workpiece to be bonded should be avoided to move before it is completely cured, and measures should be taken to fix it when it is necessary to move.
* Recommended use conditions: temperature 15~35C, relative humidity 40%~80%; if the temperature and humidity are lower than the recommended lower limit, the horn glue will cure slowly, and the construction time will be shortened if the temperature and humidity are higher than the recommended upper limit.
Recommend Products
|
1
|
MF889 Silicone weatherproof sealant
|
For curtain wall/Building doors and windows
|
|
2
|
MF881-25HM silicone structural sealant
|
For insulating glass
|
|
3
|
MF312 one-component polyurethane corner glue
|
For assembly building/Building doors and windows
|
|
4
|
MF889-25 Silicone Weatherproofing Sealant
|
For curtain wall/Building doors and windows
|
|
5
|
MF889A Silicone stone weathering sealant
|
For curtain wall/Building doors and windows
|
|
6
|
DJ-A3-MF881F fireproof sealant
|
|
|
7
|
MF322 two-component polyurethane corner glue
|
For assembly building/Building doors and windows
|
|
8
|
MF890 Silicone Sealant
|
For assembly building/Building doors and windows
|
|
9
|
MF1601 prefabricated building silicon modified polyether sealant
|
For assembly building/Building doors and windows
|
|
10
|
MF1602 prefabricated building silicon modified polyether sealant
|
For assembly building/Building doors and windows
|
|
11
|
MF-840L Two-component polysulfide insulating glass special sealant
|
For insulating glass
|
|
12
|
MF-840K Two-component polysulfide insulating glass special sealant
|
For insulating glass
|
|
13
|
MF899 Silicone structural sealant
|
For curtain wall
|
|
14
|
MF889A-25 Silicone Stone Weatherproof Sealant
|
For curtain wall/assembly building/Building doors and windows
|
|
15
|
DJ-A3-MF899F fireproof sealant
|
For curtain wall
|
|
16
|
DJ-A3-MF899F-25 fireproof sealant
|
For curtain wall
|
|
17
|
MF310 section impermeable glue
|
For Building doors and windows
|
|
18
|
MF2000M permanent plastic sealant film
|
For curtain wall/assembly building/Building doors and windows
|
|
19
|
MF881 Two Component Silicone Structural Sealant
|
For insulating glass/curtain wall
|
|
20
|
MF882 Two Component Silicone Sealant for IG
|
For insulating glass
|
|
21
|
MF881-25 Two-component Silicone Structural Sealant for IG
|
For curtain wall/Building doors and windows
|
|
22
|
MF899-25 Two-component Silicone Structural Sealant for IG
|
For curtain wall
|
|
23
|
DJ-A3-MF889 fireproof sealant
|
For curtain wall/Building doors and windows
|
|
24
|
DJ-A3-MF881F-25 fireproof sealant
|
For curtain wall/Building doors and windows
|
|
25
|
DJ-A3-MF889F-25 fireproof sealant
|
For curtain wall/Building doors and windows
|
|
26
|
MF910G Butyl Sealant
|
For insulating glass
|
|
27
|
MF840 Two Component Polysulfide Sealant
|
For insulating glass
|
|
28
|
MF895 silicone waterproof sealant
|
For Building doors and windows
|
|
29
|
MF910S Thermoplastic spacer for IG
|
For insulating glass
|
|
30
|
MF910 Butyl Sealant
|
For insulating glass
|
|
31
|
MF898 Silicone Weatherproofing Sealant
|
For curtain wall
|
|
32
|
MF910SG Thermoplastic spacer for IG
|
For insulating glass
|
|
33
|
MF910H Hotmelt Sealant
|
For insulating glass
|
|
34
|
MF881R special structural sealant for heat mirror insulating glass
|
For insulating glass
|
|
35
|
MF883 Silicone Sealant for IG
|
For insulating glass
|
|
36
|
MF910K Butyl Sealing Strip
|
For insulating glass
|
|
37
|
MF872 epoxy perfusion structural adhesive
|
For curtain wall/assembly building/Building doors and windows
|
|
38
|
MF-840 Two Component Polysulfide Sealant
|
For insulating glass
|
|
39
|
MF965F elastic protective coating
|
For curtain wall/assembly building/Building doors and windows
|
|
40
|
MF897 Silicone Anti-Mildew Sealant
|
For curtain wall/assembly building/Building doors and windows
|
|
41
|
MF899T Transparent Silicone Structural Sealant
|
For curtain wall/assembly building/Building doors and windows
|
|
42
|
MF897T transparent silicone anti-mold sealant
|
For curtain wall/assembly building
|
|
43
|
MF930 Mirror Silicone Sealant
|
For curtain wall/assembly building
|
|
44
|
MF870 Epoxy Stone Dry Hanging Adhesive
|
For curtain wall/assembly building/Building doors and windows
|
Related Products
30%
Hot Searches