7810c746521d33f6b7ccc34d0fb7beba.jpg
440837cceeb73d438bfe77011956b703.jpg
4c45f300aff330488639ca617dd1bf10.jpg
a6a912b12a7f3176906d359925a00eb8.jpg
NaN / 0

TTP223 Touch Sensor Module Light Switch 1Bit R3 Button Module TTP223

Get Latest Price
US$ 0.45
≥1 Pieces
US$ 0.43
≥100 Pieces
US$ 0.4
≥1000 Pieces
US$ 0.35
≥20000 Pieces

Quick Details

Place of Origin:
China
Brand Name:
Jubaolai
Model Number:
TTP223 Touch Sensor Module
Mounting Type:
surface mount
Product Details
TTP223 Touch Sensor Module Light Touch Switch 1Bit R3 Switch Button Sensor Module TTP223
Product Description
This module is a capacitive touch switch module based on touch detection IC (TTP223B). Normally, the module outputs low level, and the mode is low power consumption mode; when the corresponding position is touched with a finger, the module will output high level, and the mode switches to fast mode; when there is no touch for 12 seconds, the mode switches to low again power mode. The module can be installed on the surface of non-metallic materials such as plastic and glass, and a thin piece of paper (non-metallic) can be covered on the surface of the module. As long as the touch position is correct, it can be hidden on the wall, desktop, etc. button. This module frees you from the annoyance of conventional push buttons.

The module features are as follows:
Jog type: the initial state is low level, touch is high level, no touch is low level (similar to light touch button function)
low power consumption
The power supply can be 2~5.5V DC
The front and back sides can be used as the touch surface, which can replace the traditional touch button
4 M2 screw positioning holes for easy installation

Control interface: a total of 3 pins (GND, VCC, SIG), GND is the ground, VCC is the power supply, and SIG is the digital signal output pin;
Power indicator light: green LED, it will light up when the power is correct;
Touch area: the inner area of the icon similar to a fingerprint, which can be triggered by a light touch of a finger.
Positioning holes: 4 M2 screw positioning holes, the hole diameter is 2.2mm, which makes the module easy to install and position, and realizes the combination between modules
TTP223 Touch Sensor Module Light Switch 1Bit R3 Button Module TTP223
One-stop BOM service