JUHUAN Silicone Sealant is a one component fast cure structural silicone sealant. It has the features of fast curing, high strength, non-corrosive of most metal and marble, also a good weather resistance when it cured completely. It is friendly to most of the building materials.
GP neutral Silicone sealant is formulated to create a long-lasting watertight and weatherproof seal with superior flexibility and adhesion to a variety of building materials. When cured, it is firm and seal, will not crack or shrink. Easier to use and fasterto skin over.
Tset Parameter
|
Unit
|
Result Translucent Pigment
|
||
As Supplied Test at 23℃ and 50% RH
|
|
|
||
Specific Gravity
|
g/ml
|
0.97±0.02
|
||
Flow (sag or slump)
|
mm
|
0
|
||
Skin Time
|
minute
|
5~ 10
|
||
Tack-Free Time
|
hour
|
≤1
|
||
Cutting Time(5mm)
|
hour
|
≤12
|
||
Curing Speed
|
mm/d
|
3
|
||
As Cured -After 21 days at temperature 23℃ and 50±5% RH:
|
|
|
||
Hardness (Shore A)
|
points
|
23
|
||
Tensile Strength
|
Mpa
|
0.31
|
||
Movement Capability
|
%
|
12.5
|
||
Elastic Recovery
|
%
|
≥95%
|
1 . For bonding of variety of aluminum plate curtain and aluminum composite panel etc;
2 . For the joint sealing of concrete, plastic, copper, lead and zinc metal, coated glass and mirror;
3 . For installation of different kinds of aluminum/ plastic doors & windows.
1. Make sure surfaces clean and dry. Remove any soap, oil and grease.
2. Cut tip off cartridge, screw on nozzle. Cut nozzle to desired opening at 45 angle.
3. For a smooth seal hold at 45 angle and apply silicone sealant ahead of nozzle.
4. If further caulking is required, complete within 5 mins, remove excess sealant immediately with dry paper.