Fire Extinguisher Cylinder Hydraulic Pneumatic Burst Pressure Testing Machine

Product Description

The TEREK Pneumatic hydraulic test bench USES pure compressed air as the driving power source, and USES liquid booster pump as the pressure source Water ,hydraulic oil and other liquid as the pressurized medium. The output pressure is proportional to the driving gas pressure. By adjusting the pressure of the driving gas source, the corresponding pressure of the pressurized liquid can be obtained. When the pressure of the driving source is balanced with that of the pressurized liquid, the pneumatic booster pump will be automatically stops and the output liquid pressure is stabilized at the preset pressure. Therefore, it has the features of explosion-proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.

TEREK Burst Pressure Test Benches is Special pressure testing equipment, Provide pressure and bursting testing for various hydraulic hoses, valves, vessels, tubes and other hydraulic products. They are use air driven hydraulic pump for liquid pressurization. Test pressure is up to maximally 320Mpa. Test medium can be water and hydraulic oil. We have introduced the German technology to produce this high-performance test bench. The machine has a pneumatic pump and no electricity needed. The machine is easy for operation with low noise and fast boosting. Testing liquid can be recycled. It played a important role in the improvement of quality and reliability.

TEREK pump adopt aluminum alloy and stainless steel materials , We offer the most complete range of models in the industry measured, Such as: Capability of ultimate pressure, flow or output horsepower. Compatibility with a broad variety of liquids ,such as oil ,water, corrosive liquid and chemical liquid applications. High quality seals, long service life available.

Product parameters

TEREK pumps feature is a large air piston joint to a smaller diameter piston. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.TEREK model reflect the pumps nominal pressure ratios, while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is reciprocating , The automatic reciprocating motion of the piston is controlled by a built-in four-way valve.TEREK pumps are air driven at a drive air pressure of 3 to 8 bar (29 to 116 psi) by the normal air compressor.

Refer to model technical parameters.

Detailed Images

System configuration
Hydraulic pressure test machine mainly includes an air driven liquid pump,16L water tank, pressure gauges, water filter, air regulating valve,control valves,pipelines, cabinet , pressure release valve etc. The main parts of the equipment are assembled in closed stainless steel cabinet or stainless steel frames. The pressure gauge,valve and pressure regulator will be mounted on the panel. The corresponding sign will also be marked on the panel.

Applicable for :hose/tube/pipe/valve/cylinder/hydraulic test. Test medium: water/hydraulic oil Drive source: clean compressed air Driven compressed air pressure: 3-8bar (recommended driving pressure ≤8bar) Our company has rich experience in the hose ,tube, pipe pressure test field, we can provide reliable performance hydraulic pressure test equipment, leakage test equipment, pressure pulse test equipment. High pressure test bench is composed of Air driven liquid booster pump and control valve, pressure gauges, gas inlet filter, air regulating valve, pipelines, cabinet(toughened glass, professional protective screen, to ensure maximum safety), high pressure regulator, high pressure relief valve, pressure release valve etc.Applicable for :hose/tube/pipe/valve/cylinder/hydraulic test. Test medium: water/hydraulic oil Drive source: clean compressed air Driven compressed air pressure: 3-8bar (recommended driving pressure ≤8bar) Our company has rich experience in the hose ,tube, pipe pressure test field, we can provide reliable performance hydraulic pressure test equipment, leakage test equipment, pressure pulse test equipment.

Product advantages:

1. Compressed Air driven - no electricity required (connect to normal air compressor)

2. High output pressure, No airline lubricator required

3. The pressure of the output liquid is easy to adjust, just adjust the input pressure.

4. Wide range of models with different ratios 5. Easy to install, operate and maintenance.

6. All components of the contact with the gas are made of aluminum or stainless steel

7. High quality seals, long life service available

8. Gas drive, No heat,flame or spark risk and explosion proof

9. Automatic pressure holding, whatever the cause of the pressure drop, the pump will automatically start, keep the loop pressure constant.

10. The protection of tooling, special design, can effectively protect the damage of blasting operation personnel and equipment.

11 . With comprehensive security protection;  observation window with security protection mechanism which cannot operate before turn off.
Packaging & Shipping

Our Services

1. We'd like to provide our professional advice regarding machines, materials, packing and market for this product.

2. We'd like to customize special machine according to customer's request.

3. We'd like to help our customers for booking ship as customer request.

5. Operation manual will be provided after shipment. 6. We provide one year warranty.

7. Free wearing parts will be sent together with the machine .

8. Working video of the machine will be sent to you accordingly to your need.

All equipment and accessories are guaranteed for one year. Our sales staff and technical department provide permanent technical advice and operation guidance. If you have any questions about the operation of the equipment, please turn off the air source and equipment, check the instructions in time or contact the sales and service personnel. Thanks.

Equipment inventory and workshop

FAQ  :