L3 Managed 10G Fiber Industrial Ethernet Network Switch with 24 Gigabit Fiber SFP Port 10g ethernet switch 10g fiber switch 10g network switch
L3 Managed 10G Fiber Industrial Ethernet Network Switch with 24 Gigabit Fiber SFP Port 10g ethernet switch 10g fiber switch 10g network switch
Product name |
36 port 10G Managed Industrial Ethernet Switch |
Model No. |
HR600-SWTG34240F8 |
Port |
24 *Gigabit Ethernet ports+ 8* Gigabit SFP Combo ports+ 4*10G SFP Uplink + 1 *Console port. |
Network protocol |
IEEE 802.3,10Base-T IEEE 802.3u IEEE 802.3ab IEEE 802.3ae IEEE 802.3x IEEE 802.3ad IEEE 802.1ab-2005,LLDP IEEE 802.w IEEE 802.1q IEEE 802.1p,QoS/CoS IGMP Snooping DHCP Snooping/GMRP |
Network Media |
10BASE-T: Cat3,4,5 UTP(≤100 m) 100BASE-TX: Cat5 or more UTP(≤100 m) 1000BASE-TX: Cat5 or more UTP(≤100 m) |
Fiber Optical |
Multimode: 850nm, 1310nm,550m/ 2Km Single Mode: 1310nm, 20/40 Km 1550nm, 60/80/100/120Km |
LED |
FX,PWR,Link/ Act,SYN |
Power supply |
Input: AC100V-240V (DC48V-55V) |
Dimension |
Protect grade level : IP40 Product Size:440x336x45mm Weight: 2.76KG Packing weight 3.52KG |
Environments |
Working Temperature:-40~85°C Storage Temperature:-40~85°C Working humidity:90% Storage humidity:95% |
Certification |
CE, FCC,ROHS,CCC |
MTBF |
100,000 hours |
Package List |
1.Fiber Switch:1 2.User manual :1 3.Certificate:1 4.Warranty Card:1 |
Warranty |
5 years |
Basic characteristics |
|
Bandwidth |
128Gbps |
Forwarding rate |
96Mpps |
Processor |
ARM® Cortex™-A9 |
Flash memory capacity |
8MB |
Memory Capacity |
256M |
MAC address table |
16K |
Queue buffer |
64MB |
Remote upgrade |
Support upgrade through the web version or the local version upgrade |
L2 Software Features |
|
Port managment |
Enable/Disable port |
speed,duplex,MTU Setting |
|
flow-control |
|
Port information view |
|
Port mirroring |
Support port access direction, vlan mirror |
Port speed limit |
Support , speed limit by the chip |
Port isolation |
Support port isolation |
Storm suppression |
Supports unknown unicast, unknown multicast, broadcast storm suppression |
Link aggregation |
Supports static manual aggregation |
VLAN |
Access |
Trunk |
|
hybrid |
|
Supports VLAN assignment based on port, protocol, MAC |
|
Supported GVRP dynamic VLAN registration |
|
Voice VLAN |
|
MAC |
Support static add, delete |
MAC address learning limit |
|
Support for dynamic aging time settings |
|
Spanning Tree |
Support 802.1d (STP) |
Support 802.1w (RSTP) |
|
Support 802.1s (MSTP) |
|
IGMP-snooping |
Support static add, delete |
L3 & Router |
|
Interface configuration |
Support SVI port |
ARP |
Support static ARP |
Support setting ARP Aging time |
|
VRRP |
Supports VRRP route backup |
ND |
Support IPv6_ND configuration |
Router |
Static router |
RIP(V1/V2)/ OSPF(V2) / |
|
RIP/OSPF/ Support route authentication function |
|
RIP/OSPF/ Support route import, filter function |
|
Extender function |
|
ACL |
Based on source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number |
Support time-range time period management |
|
QOS |
Based on 802.1p (COS) classification |
Based on DSCP classification |
|
Based on source IP, destination IP, port number classification |
|
Support SP, WRR, DRR scheduling strategy |
|
Support rate speed limit CAR |
|
LLDP |
Supports LLDP link discovery protocol |
User setting |
Add/Delete users |
Log |
User login, operation, status, event log |
Anti-attack |
DOS Defense |
Support CPU protection, limit the rate of sending cpu packets |
|
Network diagnosis |
Support ping,telnet,trace |
System management |
Device reset, configuration save / restore, upgrade management, time setting, and so on |
Management Function |
|
CLI |
Supports serial command line management |
TELNET |
Support telnet remote management |
WEB |
Support administrative pages |
L3 Managed 10G Fiber Industrial Ethernet Network Switch with 24 Gigabit Fiber SFP Port 10g ethernet switch 10g fiber switch 10g network switch