Machine types
|
7X06 - 3 year warranty
|
Form factor
|
2U rack-mount.
|
Processor
|
Up to two 2nd Gen Intel Xeon Bronze, Silver, Gold, or Platinum processors:
* Up to 28 cores (2.7 GHz core speeds).
* Up to 3.9 GHz core speeds (8 cores). * UPI links up to 10.4 GT/s (2 UPI links used). * Up to 38.5 MB cache. * Up to 2933 MHz memory speed. 1st Gen Intel Xeon processors are also supported. |
Memory
|
Up to 24 DIMM sockets (12 DIMMs per processor; six memory channels per processor with two DIMMs per channel). Support for RDIMMs,LRDIMMs (1st Gen processors only), or 3DS RDIMMs. Memory speed up to 2933 MHz depending on the processor selected. Memory types cannot be intermixed.
|
Chipset
|
Intel C624
|
Memory capacity
|
* Processor's integrated memory controllers: Error correction code (ECC), SDDC (for x4-based memory DIMMs), ADDDC (for x4-based memory DIMMs, requires Intel Xeon Gold or Platinum processors), memory mirroring, memory rank sparing, patrol scrubbing, and demand scrubbing.
* DCPMM's onboard memory controllers: ECC, SDDC, DDDC, patrol scrubbing, and demand scrubbing. Note: In the configurations with DCPMMs, memory mirroring is supported only in the App Direct mode (other DCPMM modes do not support memory mirroring) and applies only to the RDIMMs or 3DS RDIMMs (DCPMMs are not mirrored). Memory sparing is not supported in the configurations with DCPMMs. |
Drive drives bays
|
* Up to 16 SFF (front) and 2 LFF (rear) hot-swap drive bays:
* 8x 2.5" SAS/SATA + 8x 2.5" SAS/SATA + 2x 3.5" SAS/SATA
* 4x 2.5" SAS/SATA & 4x 2.5" AnyBay + 8x 2.5" SAS/SATA + 2x 3.5" SAS/SATA * 4x 2.5" SAS/SATA & 4x 2.5" AnyBay + 4x 2.5" SAS/SATA & 4x 2.5" AnyBay + 2x 3.5" SAS/SATA * Up to 24 SFF (front) and 2 LFF (rear) hot-swap drive bays:
* 8x 2.5" SAS/SATA + 8x 2.5" SAS/SATA + 8x 2.5" SAS/SATA + 2x 3.5"
SAS/SATA * 4x 2.5" SAS/SATA & 4x 2.5" AnyBay + 8x 2.5" SAS/SATA + 8x 2.5" SAS/SATA + 2x 3.5" SAS/SATA * 4x 2.5" SAS/SATA & 4x 2.5" AnyBay + 4x 2.5" SAS/SATA & 4x 2.5" AnyBay + 8x 2.5" SAS/SATA + 2x 3.5" SAS/SATA * 4x 2.5" SAS/SATA & 4x 2.5" AnyBay + 4x 2.5" SAS/SATA & 4x 2.5" AnyBay + 4x 2.5" SAS/SATA & 4x 2.5" AnyBay * 16x 2.5" U.2 NVMe PCIe + 8x 2.5" SAS/SATA (factory-installed only) * 20x 2.5" U.2 NVMe PCIe * 24x 2.5" U.2 NVMe PCIe * Up to 10 LFF SAS/SATA hot-swap drive bays: 8x 3.5" (front) + 2x 3.5" (rear) * Up to 14 LFF hot-swap drive bays: * 12x 3.5" SAS/SATA (front) + 2x 3.5" SAS/SATA (rear) * 8x 3.5" SAS/SATA & 4x 3.5" AnyBay (front) + 2x 3.5" SAS/SATA (rear) |
Internal storage capacity
|
* 2.5-inch drives:
* 737.28TB using 24x 30.72TB 2.5-inch SAS/SATA SSDs
* 368.64TB using 24x 15.36TB 2.5-inch NVMe SSDs * 57.6TB using 24x 2.4TB 2.5-inch HDDs * 3.5-inch drives:
* 280TB using 14x 20TB 3.5-inch HDDs
* 215.04TB using 14x 15.36TB 3.5-inch SAS/SATA SSDs * 30.72TB using 4x 7.68TB 3.5-inch NVMe SSDs |
Storage controller
|
* 12 Gb SAS/SATA RAID adapters with up to 8GB flash-backed cache
* 12 Gb SAS/SATA HBA (non-RAID) * Onboard PCIe NVMe (with Intel VROC NVMe RAID support for Intel SSDs and optionally non-Intel SSDs) * NVMe Switch Adapters (with Intel VROC NVMe RAID support for Intel SSDs and optionally non-Intel SSDs) |
Network Interface
|
* Onboard LOM slot for up to 4x 1/10 Gb Ethernet ports:
* 2x or 4x 1 GbE RJ-45 ports (no 10/100 Mb support)
* 2x or 4x 10 GbE RJ-45 ports (no 10/100 Mb support) * 2x or 4x 10 GbE SFP+ ports (no 10/100 Mb support) * Optional Mezzanine LOM (ML2) slot for dual-port 10 GbE cards with SFP+ or RJ-45 connectors or single- or dual-port 25 GbE cards with SFP28 connectors. * 1x RJ-45 10/100/1000 Mb Ethernet systems management port. |
I/O expansion slots
|
Up to seven slots. Slots 4 and 7 are the fixed slots on the system planar, and the remaining slots depend on the riser cards installed. The slots are as follows: * Slot 1: PCIe 3.0 x16 or PCIe 3.0 x8; full-height, half-length (PCIe x16 slot can be single-or double-wide)
* Slot 2: PCIe 3.0 x8; full-height, half-length (not present if Slot 1 is PCIe x16 double-wide or Slot 3 is ML2 x16) * Slot 3: PCIe 3.0 x8, or PCIe 3.0 x16, or ML2 x8, or ML2 x16; full-height, half-length * Slot 4: PCIe 3.0 x8; low profile (vertical slot on system planar) * Slot 5: PCIe 3.0 x16; full-height, half-length * Slot 6: PCIe 3.0 x16; full-height, half-length * Slot 7: PCIe 3.0 x8 (for an internal storage controller) Slots 5 and 6 require the second processor to be installed. Single-wide PCIe x16 Slot 1 requires the second processor to be installed. |
Ports
|
* Front: 1x USB 2.0 port with XClarity Controller access and 1x USB 3.0 port; optional 1x VGA port.
* Rear: 2x USB 3.0 ports and 1x VGA port; optional 1x DB-9 serial port. |
Cooling
|
Five (one processor) or six (two processors) hot-swap single-rotor system fans with N+1 redundancy.
|
Power supply
|
Up to two redundant hot-swap 550 W, 750 W, or 1100 W (100 - 240 V), or 1600 W (200 - 240 V) High Efficiency Platinum AC power supplies, or 750 W (200 - 240 V) High Efficiency Titanium AC power supplies. HVDC support (PRC only).
|
Video
|
Matrox G200e with 16 MB memory integrated into the XClarity Controller. Maximum resolution is 1920x1200 at 60 Hz with 32 bits per pixel.
|
Dimensions
|
Width: 445 mm (17.5 in.), height: 87 mm (3.4 in.), depth: 764 mm (30.1 in.).
|
Weight
|
Minimum configuration: 19 kg (41.9 lb), maximum: 32 kg (70.5 lb)
|