NaN / 0
General purpose oil resistant clear rtv fast cure silicone sealant
Get Latest Price
US$ 0.5
≥2400 Pieces
Quick Details
CAS No.:
4253-34-3
Other Names:
gap filler
MF:
Mixture
EINECS No.:
224-221-9
Product Details
General purpose oil resistant clear rtv fast cure silicone sealant
Features:
One-component room temperature curing neutral,easy to use.In the temperature range 4-40℃’s has good extrusion and thixotropy. For
most materials have good adhesive roperties.Excellent weather resistance and high temperature performance,is the ideal weather sea
Directions:
Must use a solvent such as toluene or acetone,at the interface clean and keep dry.Construction of application of sealant to
completely fill the joints to ensure that both sides of bonding.They needs to protect the side labeled tape,but not touch the tape
will be the construction surface.The plastic is not cured prior to trimming immediately in order to achieve a beautiful look.
Cautions:
1.Not available in all surface leaking grease,plasticize or solvents.
2.Difficult for enclose spaces or in direct contact with the surface of the food or drinking water.
3.The substrate surface temperature is below 4℃or over 40℃ not construction.Should not adhered copper or copper alloy material.
One-component room temperature curing neutral,easy to use.In the temperature range 4-40℃’s has good extrusion and thixotropy. For
most materials have good adhesive roperties.Excellent weather resistance and high temperature performance,is the ideal weather sea
Directions:
Must use a solvent such as toluene or acetone,at the interface clean and keep dry.Construction of application of sealant to
completely fill the joints to ensure that both sides of bonding.They needs to protect the side labeled tape,but not touch the tape
will be the construction surface.The plastic is not cured prior to trimming immediately in order to achieve a beautiful look.
Cautions:
1.Not available in all surface leaking grease,plasticize or solvents.
2.Difficult for enclose spaces or in direct contact with the surface of the food or drinking water.
3.The substrate surface temperature is below 4℃or over 40℃ not construction.Should not adhered copper or copper alloy material.
|
Test Item
|
Unit
|
Actual results
|
|
Appearance
|
|
Smooth, no air bubbles, no lumps
|
|
Tack free time(at what % humidity)
|
min
|
5
|
|
Slump
|
mm
|
0
|
|
Extrusion
|
ml/min
|
1483
|
|
Shore A hardness /72h
|
|
27
|
|
Weight loss
|
|
4%
|
|
Cracking
|
|
No
|
|
Chalking
|
|
No
|
|
Tensile adhesion
|
Mpa
|
0.6
|
|
Elongation at break
|
%
|
316
|
|
Specific gravity
|
g/cm3
|
1
|
|
Completely dry
|
hours
|
16
|
|
Temperature Resistence
|
°C
|
-50℃~150℃
|
Related Products
30%
Hot Searches