NaN / 0
RCV 3/4" PEX Brass Full Port Shut Off Ball Valve, PEX Brass Full Port Shut-off Ball Valve
Get Latest Price
US$ 2.15
≥1 Pieces
Quick Details
Port Size:
DN15-DN100
Warranty:
2 years
Place of Origin:
China
Model Number:
J11W-16T
Product Details
Products Description
1.Nominal diameter:DN15～100
2
.
Applicable temp.: -10～120℃
3.Nominal pressure:normally PN16bar, specially PN25bar
4.Applicable medium:water, oil, gas and other non-corrosive medium
5.Valve body material:brass(code:T)
6.It has no flow direction limit, can be installed at any angle, can be bi-directional
7.Valve seat sealing material:body material(code:W)
8.Fully open, the erosiveness of medium impact on sealing surface is smaller than that on globe valve
4.Applicable medium:water, oil, gas and other non-corrosive medium
5.Valve body material:brass(code:T)
6.It has no flow direction limit, can be installed at any angle, can be bi-directional
7.Valve seat sealing material:body material(code:W)
8.Fully open, the erosiveness of medium impact on sealing surface is smaller than that on globe valve
Installation Precautions
1. When the pipe thread is connected to the globe valve, when installing and tightening, the pipe should be perpendicular to the end face of the valve body, and the hexagonal or octagonal part on the same side of the thread should be wrenched. The installation torque should not be more than 50M.m, and the DN25 installation torque should not be more than 70N.m, so as not to cause deformation of the valve body or affect the opening.
2. During installation, the sealing material should be kept clean and clean.
3. The indexing circle on the flanged globe valve should match the indexing size of the pipe flange. The center of the pipe at both ends should be perpendicular to the plane of the two flanges of the valve body, otherwise the valve body will be distorted and deformed.
4. When the globe valve connected by the pipe thread is connected with the thread of the pipe end, the inner thread
can be a conical pipe thread or a cylindrical pipe thread, but the outer thread must be a conical pipe thread, otherwise it will easily lead to a loose connection and leakage
5. When installing, pay attention to the flow direction of the medium and the direction of the arrow on the valve body.
6. The globe valve operated by handwheel can be installed in any position of the pipeline. 7. The soft-seal globe valve is sealed with PTFE material, and the hard-seal globe valve is sealed with the same material itself (metal).
4. When the globe valve connected by the pipe thread is connected with the thread of the pipe end, the inner thread
can be a conical pipe thread or a cylindrical pipe thread, but the outer thread must be a conical pipe thread, otherwise it will easily lead to a loose connection and leakage
5. When installing, pay attention to the flow direction of the medium and the direction of the arrow on the valve body.
6. The globe valve operated by handwheel can be installed in any position of the pipeline. 7. The soft-seal globe valve is sealed with PTFE material, and the hard-seal globe valve is sealed with the same material itself (metal).
Scope of use
Globe valve is mainly used for cutting off medium, regulating and throttling. Due to the small stroke between the valve disc and the switch, the sealing surface can withstand multiple openings and closings, which is suitable for occasions requiring frequent opening and closing. The working medium of the globe valve is water, oil, gas, etc., the working temperature is -10℃≤ t≤120℃, and the nominal pressure is 1.6MPa.
Product Paramenters
Application Area
Factory Show
Explore More Products
Related Products
30%
Hot Searches