NaN / 0
Kafuter K-300 UV glue glass glass crystal bonding large area glass bonding
Get Latest Price
US$ 2.5
≥10 Pieces
US$ 2.1
≥100 Pieces
Quick Details
CAS No.:
868-77-9
Other Names:
UV Glue
MF:
(C4H6O2)x
EINECS No.:
TQ2700000
Product Details
Products Description
Characteristics:
UV light curing adhesive is one-part, Shenzhen Kafuter K-300 Adhesive Tape Rewinding Machine Shenzhen Kafuter K-300 Adhesive Tape Rewinding Machine modified acrylic adhesive which can exposed to UV light or visible light
Features:
high transparency and bonding strength, low odor and viscosity, good deaeration, suitable for big area glass or crystal bonding
Application:
Using in big area glass or crystal bonding. Like bonding in glass doors, glass artifacts, crystal artifacts, etc.
Typical Properties:
Hot sales Super transparent UV Curing Glass crystal bonding suitable large area glass bonding Kafuter UV glue K-300
Kafuter uv light adhesive is recommended for big area glass or crystal bonding .uv adhesive K-300 can be cured by exposure to UV/Visible light of sufficent intensity. surface cure is enhanced by exposure to uv light in the 200 to 260 nm range. cure rate and ultimate depth of cure depend on light intensity,spectral distribution of the light source, exposure time and light transmittane of the substrate through which the light must pass.
Specification
Applied Range
Products Description
K-300 is a UV or visible curing modified acrylate adhesive with low odor, high transparency, high bonding strength, low viscosity and easy defoaming. It is typically used in large area glass crystal bonding.
Typical curing properties:
The K-300 will cure under ultraviolet light and slowly under sunlight.The light source of 220-260nm is helpful for surface curing.Curing rate, final
The curing depth and surface drying effect are related to UV light source, illumination time and transmittance of material.It is suggested that the final curing process should be determined by experiments.
The K-300 will cure under ultraviolet light and slowly under sunlight.The light source of 220-260nm is helpful for surface curing.Curing rate, final
The curing depth and surface drying effect are related to UV light source, illumination time and transmittance of material.It is suggested that the final curing process should be determined by experiments.
Positioning time:
10 Second - 125w Philips high voltage fluorescent lamp, 4 MW / cm 2 UVAComplete curing time:
180 Second - 125w Philips high voltage fluorescent lamp, 4 MW / cm 2 UVA
10 Second - 125w Philips high voltage fluorescent lamp, 4 MW / cm 2 UVAComplete curing time:
180 Second - 125w Philips high voltage fluorescent lamp, 4 MW / cm 2 UVA
Typical properties after curing:
Tensile shear strength (GB 7124-86) lap area 25 × 12.5 = 312.5mm2: glass / stainless steel, ≥ 10MPa
Tensile shear strength (GB 7124-86) lap area 25 × 12.5 = 312.5mm2: glass / stainless steel, ≥ 10MPa
instructions:
1. Clean sizing, dust, oil and dry the bonding surface before gluing, and determine the amount of dispensing as required
2. The UV irradiation time is adjusted according to the power of the UV lamp and the distance between the UV lamp and the gluing part
3. Excess glue can be wiped off
4. The remaining glue should not be returned to the original package to avoid pollution. The remaining glue should be kept away from light, sealed and stored at room temperature
1. Clean sizing, dust, oil and dry the bonding surface before gluing, and determine the amount of dispensing as required
2. The UV irradiation time is adjusted according to the power of the UV lamp and the distance between the UV lamp and the gluing part
3. Excess glue can be wiped off
4. The remaining glue should not be returned to the original package to avoid pollution. The remaining glue should be kept away from light, sealed and stored at room temperature
matters needing attention:
Avoid contact with eyes, skin and clothing.This product has slight irritation to eyes and skin.If it splashes into your eyes,
please wash with plenty of water immediately. If you still feel unwell, please go to the hospital for examination.Wash with soapy water immediately after skin contact.Please wash the clothes after contact.Keep away from children.
Avoid contact with eyes, skin and clothing.This product has slight irritation to eyes and skin.If it splashes into your eyes,
please wash with plenty of water immediately. If you still feel unwell, please go to the hospital for examination.Wash with soapy water immediately after skin contact.Please wash the clothes after contact.Keep away from children.
keep in storageObjective:
This product is sensitive to light and heat. It needs to be stored in a cool, dry place, away from
light, below 28 ℃, valid for one year.
light, below 28 ℃, valid for one year.
Package specification:
250G / piece or packing according to customer's requirement.
Specification
|
project
|
Index description
|
|
|
appearance
|
Clear near water-white liquid
|
Visual inspection
|
|
Viscosity CPS
|
< 110
|
Brookfield DV - Ⅱ viscometer, 25 ℃, SC 4-15, rotor 150rpm
|
|
Hardness (d)
|
75
|
GB / T 531-1999 curing test
|
|
Elongation at break%
|
-
|
GB / T 528-1998 curing test
|
FAQ
Q: Can I buy samples placing orders?
A: Yes.Please feel free to contact us. The sample is free, you only need to pay the shipping cost.
Q: Can you provide OEM service?
A: Yes, we can produce under your own brand name. Logo and packing design need to be provided so as to make customized brand name.
Q: What is your payment term?
A: T/T, Western Union, L/C and Paypal. This is negotiable.
Q: What is the shipping method?
A: It could be shipped by sea, by air or by express(EMS, UPS, DHL, TNT, FEDEX and ect).Please confirm with us before placing orders.
Q: What other products do you have?
A: In addition to our main products are UV glue and silicone sealant, epoxy resin AB glue, we also have many other products, such as acrylic acid AB glue, anaerobic glue, instant dry glue, Ms glue, polyurethane glue and other thousands of high-performance adhesives.
Related Products
30%
Hot Searches