Whole Aluminum structure 500W Spindle 4540 CNC Machine 3 Axis Metal Milling Engraving Small CNC Machine

500W Spindle & High Speed Making it possible to cut stainless steel, aluminum and other metals. the spindle speed range is 0-11000rpm/min. Larger Working Area Aluminum Platform Increased to 430*390*90 mm(16.9*15.4*3.5inch). The working table has precise scale lines, which is convenient for you to locate and measure the engraving material size.  Wide Application & Compatibility

The maximum no-load speed can reach 11000rpm/min makes it possible to engraving metal, like aluminum, brass, copper and silver, of course it can carving other material like wood, plexiglass, leather, PCB, MDF, acrylic, resin, nylon, carbon fiber, PCB, etc.

If you are an professional in CNC and want to have an upgrade set, you can add a module to upgrade the 4540CNC, making it more powerful. With this module, it allows for more engraving/cutting possibilities.

The module of XYZ axis and wires dramatically reduces the effort of assembly, allowing you to start carving your projects in less time.

Touchscreen LCD Display

Please Note

Offline Controller

Comes with a 2.8" Touchscreen LCD Display that's easy to read and use.

As shown in the diagram, when the status display bar shows "? ?", it indicates that the offline machine cannot recognize the status of the control panel at this time, you need to press the reset button of the CNC machine control panel, and then restart the offline controller.

With the offline controller, you can control your CNC without connecting to a computer. Easily load your projects onto the included SD card and have them ready to go without the need of a dedicated computer (about more details, please see the user manual).

A: Yes, it can carve metals, Depth per pass and feed rate will need to be adjusted for different metal. We recommend depth per pass of 0.1mm and feed rate of 120mm/min for stainless steel, depth per pass of 1mm and feed rate of 300mm/min for wood. The lower the speed, the more stable the work. Note: When engraving metals, the temperature of the metal will be extremely high due to the huge friction between the milling cutter and the metal, so please keep adding lubricating oil during engraving process.

A: We provide a free control software Candle grbl which is fine to start and get it going. It’s then personal choice afterwards what you go to, Easel is fairly simple but loads of options. Fusion 360 is good but is expensive. Please note that the Candle is just a control software, can only read G-code files, does not support design pictures. So, we need to use other software to design images and make G-code files, Most of our customers use Easel to design G-code file and then use Candle or UGS to control the machine.

A: Yes, you can run the file in Candle, or transfer the file to a usb drive/sd card and run it in the controller.

A: We recommend professionals to buy this machine, the new starter is not recommended. The CNC itself is not a problem, it’s the software part that’s the difficulty. You can go to YouTube to learn a lot of the basics. It takes more patience, but worth it.