9aa830908a0b3d769ade372b548fa9e3.jpg
f884a8732c5b3a4c9f7e67114b38db7c.jpg
fb81257677cc35b58e416a6ee936bb73.jpg
cc1ecfd705423f27a349646e177e42e2.jpg
NaN / 0

Maydos Non Flammable Dap Adhesive Rubber Solution Glue

Get Latest Price
US$ 0.4
≥2000 Kilograms

Quick Details

CAS No.:
7085-85-0
Other Names:
Super Glue
MF:
Mixture
EINECS No.:
230-391-5
Product Details
Products Description
Description
Maydos SBS Adhesive is formulated from excellent materials. It has good features such as easily construct, rapid drying speed, powerful viscidity, resist ultraviolet radiation after solidification, be able to bear or endure canker, strike. Prevent damp, resist aging
.
Recommended use
Suitable for contacting between different materials such as plywood, board, floorboard, wallpaper, rubber, anti-firing plate, aluminum-plastic plate and cloths, etc.
It can be widely used for both hard-to-contact materials like anti-firing plate, aluminum-plastic plate and PVC board, and common board like wood board, plywood, MDF board,floor board, furniture, wallpaper, polyester plywood, bamboo board, asbestos board, carpet, rubber, etc.
Technical Data
Appearance
light yellow viscous liquid, no visible foreign matters
Viscosity
55-60 ku / 30°C
300-550 MPa. S/25°C
Solids Content
34%-36%
Shear Strength
30 minutes: ≥0.7mpa
48 hours: ≥1.1mpa
Specific Gravity
0. 86-0.87kg/L
VOC
≤700 g/L
Feature


Features

1.Adopted benzene free, no hazardous materials and additives, low VOC, protect the applicator and consumers’ health. 2.High solid
content: Solid content exceed 34%, much higher than conventional adhesives, effectively save adhesive consumption (dosage) by
30%-40%. 3.Freezing temperature resistant: no influence at -15°C to -20°C. Easy for transport and bonding in winter.
4.Super first-bonding power, good penetration property, quick dry.
5.Stable performance: moisture resistant after hardening, water-immersion resistant, good impact resistant, long service life.

Directions for use
Surface preparation
The grease, smirch, rust, moisture of the contacted surface must be cleaned off, surface of bamboo, leather or rubber etc must be matted.
Recommended apply system
Brushing
The effect will be better if stir thoroughly or make the pot inverted repeatedly in order to mix the glue before use. The contacted surface is brushed by the adhesive in thin layer, brushing toward a same aspect for air getting out to strengthen the powerful viscidity.
Airing
Wait for 5 to 25 minutes (25 Celsius) after brushing, until the condition is proper to
agglutinate.

Contacting
Contacting is level one time because the viscidity is super powerful, add pressure or tapping for the super viscidity of continua adhesive.
Remarks
The most suitable temperature and humidity for contacting (bonding): 20°C -30°C,
humidity: 55%-75%
Adhesive contains VOC, easily burnt, keep away from fire. Make sure the
construction site is well ventilated.
No. of Regulation On Transporting Dangerous Goods: 32196
Product packaging