20V Portable Cordless Soldering Gun Wireless Battery Automatic Soldering Iron Gun

Nyleo Lithium battery Rechargeable soldering gun electric soldering iron welding assembly

How to use

1. Hand gun used for the first time, be warm a few minutes, a smoke is a normal phenomenon, will disappear in a few seconds.

2. Will be rated into the tin from the tin line into the mouth, and then pull the trigger direction of the arrow until the tin lead solder wire to the nozzle only to be working.

3. Stop the use or replacement of tin wire to be out, as long as the direction of the board-up drive, and remove the tin wire.

4. Heater replacement, the first protective cover removed, open the heater connection, and then remove the iron Tsui to the core of the heat can be replaced.

Caution:
1. At work, iron and iron pipe Tsui temperatures up to 400 degrees Celsius, non-human touch to prevent burns.

2. Stop using the hand gun, set it on its bracket.

3. Work is completed, turn off the power so to save the place after cooling.

Features:
1. Soldering gun used compact mechanical design work easier.

2. Quality heater, working life longer.

3. Simple, easy to complete the welding operation.

4. Rated with a diameter of 0.8 ~1.2mm tin line.

5. Using the voltage 220VAC.

HOW TO SOLDER

1. Clean the parts to be joined

2.Clean the soldering iron tip and ‘’tin” all faces of tip with a coating of solder.

3.Heat the part that will be soldered. Apply flux cored solder to the heated part(not the soldering tip) and heat it until the solder melts and flow freely.