High performance ATV engine GY6 150cc engine

♥GY6 150 cc engine is often used to assemble the scooter.This complete engine includes kick start and starter.

♥Engine Type: GY6 Single Cylinder 4-Stroke.

♥Cooling: Air Cooled.

♥57mm cylinder / piston.

♥Starting: electric / kick.

♥Set up for rear drum brake.

♥Set up for pair emissions system.

♥Includes premium pack drive belt & NGK spark plug.

♥Engine oil: 0.75 liters.

♥Gear oil: 0.17 liters (6 fl Oz).

♥This scooter engine is used in a wide variety of applications, including full-size street legal scooters, all terrain vehicles (ATVs), dirt bikes, and go karts. Compatible with both 125cc and 150cc engine size scooters and vehicles.

♥Check oil level after letting the engine idle for a few minutes, add additional oil if needed.

♥The difference is in the length of the rear swing arm.

♥Different lengths have been made to accommodate different wheel sizes. ♥For rear drum brakes only.

Before taking anything apart, be sure to drain the fuel from both the gas tank and the carburetor's float bowl. You'll find the drain tube hanging off of the very bottom (driver's side) of the carburetor. Most 125cc – 150cc GY6 carburetors have a valve immediately next to the drain tube that can be opened with a flat-blade screwdriver.

Other setups have the valve at the tip of the drain tube. If your carburetor is aftermarket came from a lower-price source, you might not have a valve or tube at all. Be careful opening the float bowl on one of those, as gas will spill if you're not holding it upright.

1.Remove the carburetor from the engine by loosening the clamp on the intake inlet manifold. Flip it over and remove the four screws that fasten the float bowl.

2.Remove the float pin, push it through using a pointed tool.

3.Using a flat-blade screwdriver, remove both of the jets circled in the center. Spray carburetor cleaner through the three passages that are circled. The spray should dissolve and remove any blockages caused by old gasoline.

4.Look through both jets. You should see light coming from the end of each one. The most troublesome piece is the longer pilot jet which has a very narrow internal passage. Compressed air and chemicals might not work. In that case, use a single strand of copper from an electrical wire to clean out the blockage.

For carburetors that are severely gummed up we use compressed air @ 120psi to clean the passages. In some cases it may be necessary to let it soak overnight in carburetor dip.

Note: A little gas may spill out of the carburetor's overflow tube when you flip it over to get to the float bowl.

Go Kart Parts ATV/UTV Parts Scooter Parts Golf Cart Parts

Motorcycle  Parts Bicycle Parts MINIBike Parts Customized Parts

Taizhou Xinydd Machinery Co., Ltd. was founded in 2015. We located in Binhai Industrial Area, Taizhou, Zhejiang Province. We have professional engineers and management team in the producing of the clutches for U.S.A, Russian, Europe, Brazil, and other countries. We have enough ability to satisfy different requirements from yours in this field.Who could bring a lot of international experience and professional and an unparalleled level of service for you.

Q1. How to pay?
A: TT, PAYPAL, WEST UNION, DP, DA, Credit card up to you.

Q2. What is your term of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q3. How about your delivery time?
A: Generally, it will take 24-48 hours after receiving your advance payment. Some is one week. The specific delivery time depends on the items and the quantity of your order.

Q4. How to produce customized products?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q5. How to get a sample?
A: We can supply the sample if we have ready parts in stock.

Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q7: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter                 where they come from.