55ea6244b7133f86adf690d4d215a813.jpg
d37a7706339b3985bc3fa631fa96df2d.jpg
0f27bbdc3f043944b3aaaba72e2a7e36.jpg
b56e5b3522393538ad8afa16bb1b81f0.jpg
NaN / 0

Great High Strength Grey Powder Cement-based Tile Adhesive Professional Porcelain Tile Thin Set Mortar

Get Latest Price
US$ 3.2
≥100 Bags
US$ 2.9
≥200 Bags
US$ 2.6
≥300 Bags

Quick Details

CAS No.:
9009-54-5
Other Names:
Tile glue
MF:
C3H8N2O
EINECS No.:
500-033-5
Product Details
Product Description
Great High Strength Grey Powder Cement-based Tile Adhesive Professional Porcelain Tile Thin Set Mortar
Product description
Ceramic tile binder is a cement binder consisting of cement, sand, additives, acrylic. Suitable for ceramic tile, ceramic tile,
marble and other internal and external adhesive work. We have three versions for you to
choose.

FR8001C1

Suitable for tiles less than 400mm*800mm

FR8001C2

•Suitable for tiles less than 750mm*1500mm

FR8001C3

•Suitable for tiles less than 900mm*1800mm
Product Paramenters
Where to Use:
Home decoration, exhibition hall and other tile paving
Materials:
A blend of portland cement, graded sand and special additives
Dosage:
3.5kg/m2 if the 6X 6mm scraper is used
5.0kg/m2 if the 10X 10mm scraper is used
7.0kg/m2 if the 12 X 12mm scraper is used
Less dosage for the even surface.
Mixing Ratio:
4 : 1 (powder : water)
Tensile Adhesion Strength:
≥1.0MPa under all test conditions
Coverage:
2-3 sqm/20kg bag 6mm bed
Classification:
FR8001C1
Shelf Life:
Up to 12 months in unopened bags, stored in an elevated, cool dry place
PotLife:
Approx. 90 minutes  20°C
Application Temperature:
Between 5 °C and 35°C
Packaging:
20kg/bag
Wooden Pallet:
100 bags/pallet
Delivery Time:
3 days upon payment
Precautions for use

Attention:

• Construction temperature is 5-35° • Use an electric mixer for best mixing • Moisture ratio can be adjusted according to substrate, weather, construction conditions, etc • In the rainy construction, we must do a good job of shelter protection measures, and to ensure that within 24 hours after brickwork, the construction area is not wet by rain • The glue should be used within 2-3 hours according to weather conditions • Do not mix the dried glue with water and then use it again • After the bricklaying is complete, wait until the glue has completely dried and solidified (about 24 hours) before proceeding to the next caulking process • The scraping coating of ceramic tile adhesive should be uniform and fully pasted, and the thickness of the adhesive layer should be about half the height of the tooth spacing of the tooth type scraping plate • Tile on tile, must be used in conjunction with additives
Installation Instructions
1.Surface treatment
• All surfaces should be firm, clean, free of empty drums, oil, wax and release agent and other loose objects, painted surfaces should be rough balls, exposing at least 80% of the original surface, after the concrete surface is finished, it shall be cured for at least 28 days before it can be paved with bricks • New plastered surfaces should be cured for at least 7 days before being paved with brick. Old concrete and plastered surfaces can be cleaned with industrial detergents or oil stains and then rinsed with a high-pressure faucet. • The surface should be sun-dried for 24 hours before bricklaying • Remove residue from concrete surfaces, especially from slant concrete slabs
2.Mix
• Pour the ceramic tile glue powder into clear water and stir it into paste. Pay attention to add water first and then pour the powder. Use an electric mixer when stirring. • Mix 20kg powder, 4-5 l water, if necessary, use additives instead of water, 20kg powder, 5-6 l additives. • Fully mix the water. After the mixing is complete, it needs to stand still for about ten minutes before it can be used. It can increase the bonding force.
3.Construction technology
• The use of ceramic tile adhesive tiles, traditional spot method, easy to cause hollow, so we strongly recommend the use of scraper method or double-sided adhesive. The specific methods are as follows: • Apply the glue paste to the working face with the tooth scraper to make it evenly distributed and form a strip of teeth. Each coating is about 1 square meters (depending on the weather temperature) and then knead the tiles on the drying time • Select the size of the tooth scraper should consider the flatness of the working surface and the degree of concave and convex on the back of the tile. • If the gap on the back of the ceramic tile is deep or the stone and ceramic tile are larger and heavier, double-sided glue should be applied, that is, the working face and the back of the ceramic tile are simultaneously coated with glue.
Our case
We always adhere to the integrity based, innovation andfar concept. Bring our quality and service to every customer.
Packing & Delivery
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.