For the real projection, please see the following image.
This logo lights fit to replace your original car door lights. When the door is opened, the logo light is powered on and will be
projecting onto the ground. When you close the door, the logo light disappears.
The door lights can be compatible with BMW cars:
3-series (2006-12)E90 sedan (325i, 325xi, 328i, 328i xDrive, 328xi, 330i, 330xi, 335d, 335i, 335i xDrive, 335xi)
3-series(2006-11) E91 5-door touring
3-series(2007-11)E92 coupe (328i, 328i xDrive, 328xi, 335i, 335i xDrive)
3-series(2008-11) E90 E92 E93 M3
3-series(2007-11) E93 convertible (328i, 335i, 335is)
5-series(2004-09) E60 sedan (525i, 525xi, 528i, 528xi, 530i, 530xi, 535i, 535xi, 545i, 550i)
5-series(2006-10) E61 touring (530xi, 535xi)
5-series(2006-10) E60 M5
5-series F10 / F11 (528i, 535i, 535i xDrive, 550i, 550i xDrive)
5-series(2011-14) F18 Long wheel base sedan
5-series(2009-14) Gran Turismo F07
6-series(2007-10) E63 / E64 coupe / convertible (645Ci, 650i, M6)
6-series(2011-14) F12 / F13 coupe / convertible (640i, 650i, M6)
7-series(2003-08) E65 / E66 / E67 / E68 (745i, 745Li, 750i, 750Li, 760i, 760Li, B7 ALPINA)
7-series(2009-14) F01 / F02 / F03 / F04 (740i, 740Li, 750i, 750i xDrive, 750Li, 750Li xDrive, 760Li, B7 ALPINA, B7L ALPINA)
Z-series(2003-08) E85 / E86 Z4
Z-series(2009-13) E89 Z4
X-series-F15.F16
GT series- 2010-2015
Attention please:
1. For above car models, before making order, please check whether your original car door light can be powered or not? If there is no power supply for your original door light, this items can't fit your car. Because even for the same model, some general configuration hasn't power supply for the door lights, only its deluxe configuration has power supply for the door lights.
2. For some cars, because of the position of the door lights, the light projection is hitting the door when it is opened, and therefore, only a part of projecting appears on the ground. If you mind it, please don't buy. Thanks for your understand.
How to replace car door light(Installation Instructions):
1. Use A Flathead Screwdriver to Remove and Disconnect Original Door Step Lights;
2. Plug in New Door Lights with Correspondent Connector;
3. Put new Door Lights to The Spot Where Your Original Lights Were;
4. Done! Logo Should Be Projected on The Ground.