RP Series 1000W~6000W Pure Sine Wave Inverter/Charger for Lead Acid/Lithium Battery
Model |
1012E |
2024E |
3024/48E |
4024/48E |
5024/48E |
6024/48E |
||
Rated Power |
1000W |
2000W |
3000W |
4000E |
5000W |
6000W |
||
Transfer time |
Typical 10ms |
|||||||
Invert mode |
|
|||||||
|
Norminal output volt |
120Vac/230Vac(100Vac~120Vac;200Vac~240Vac) |
||||||
Output frequency |
50Hz+/-0.3Hz;60Hz+/-0.3Hz |
|||||||
Output wave |
Pure Sine Wave |
|||||||
Output overload |
105%<load<120%+/-10%:Fault(turn off output after 10s) 120%<load<150%+/-10%:Fault(turn off output after 3s) 150%<load+/-10%: Fault(turn off output after 1s) |
|||||||
Short circuit protection |
Software protection |
|||||||
Norminal efficiency |
>88% |
|||||||
Power Factor |
0.9~1 |
|||||||
Line mode |
|
|
||||||
|
Input voltage range |
Narrow range |
Wide range |
|||||
Norminal output voltage +/-15% |
Norminal output voltage +15%,-23% |
|||||||
Input frequency |
40~70Hz |
|||||||
Input Wave form |
Sine wave(Utility or generator) |
|||||||
Short circuit protect |
Circuit breaker |
|||||||
Output overload |
120%<load<150%+/-10%:Fault(turn off output after 60s)
150%<load+/-10%: Fault(turn off output after 1s |
|||||||
Over charge protect shutdown |
16V for 12V(*2 for 24V,and *4 for 48V) |
|||||||
Efficiency online |
>95% |
|||||||
AC charge |
Charge current can be set(5A down/up setting) |
|||||||
Selection of battery charging voltage type |
||||||||
Battery type |
Fast V |
Float V |
||||||
Gel U.S.A |
14.0V |
13.7V |
||||||
A.G.M1 |
14.1V |
13.4V |
||||||
A.G.M2 |
14.6V |
13.7V |
||||||
Sealed lead acid |
14.4V |
13.6V |
||||||
Gel euro |
14.4V |
13.8V |
||||||
Open lead acid |
14.8V |
13.3V |
||||||
Calcium |
15.1V |
13.6V |
||||||
De Sulphation |
15.5V for 4 hours then off |
|||||||
Lithium |
14.7V |
|||||||
Other |
User-defined |
|||||||
battery |
|
|
|
|
|
|
||
|
Input |
12V |
24V |
24V/48V |
24V/48V |
24V/48V |
24V/48V |
|
Voltage range |
12V(10V~16V)+/-0.3V;/*2 for 24V/*4for 48V |
|||||||
Low DC warning volt |
12V(10.5V+/-0.3V);/*2 for 24V/*4for 48V |
|||||||
Low dc cut-off volt |
12V(10V+/-0.3V);/*2 for 24V/*4for 48V |
|||||||
Other |
|
|
|
|
|
|
||
Operating temp range |
0~40 ℃ |
|||||||
Humidity |
0~95% |
|||||||
Noise |
<50dB |
|||||||
Dimension(mm) |
422*217*210 |
574*345*197 |
||||||
|
|
|
|
|
|
|
||
Feature:
· Pure sine wave Inverter
· Output power factor 1
· Selectable charging current via LCD
· Selectable input voltage range for home appliances and personal computer
· Configurable AC/battery input priority Via LCD setting
· Configurable power saving mode via LCD setting
· Compatible with generator power
· Dry contact port generator to realize mutual control by generator and utility
· Auto restart when AC is recovering
· Overload and short circuit protection
· Small battery charger design for optimized battery performance
· Cold start function
· Smart fan running control to extend service life and reduce noise
· Support to run Lithium battery
· RS232 communication port and remote control panel optional
· Single phase 110Vac or 220Vac and split phase 110Vac/220Vac optional