DC 12V 10A 1CH 433MHz Relay Wireless RF Remote Control Switch Module Receiver With Transmitter

The gadget is a Single Channel Wireless Switch Control Panel, which comes with ultra-strong function and bring you much convenience in your daily life. It support remotely and wirelessly control you roller shutter door, garage door and other telecommand equipments within 50m (free space). In addition, it supports multiple working mode, such as, Momentary, Toggle and Latching. Bringing you brand new experience of remote control

Features:

*Support Multiple Working Mode: Momentary, Toggle and Latching Mode.

*Support the type of remote control(Support Code): Learning Code(1527), Fixed Code(2262).

*Support storing the quantity of remote control: 25 Pcs(NOTE: The system can store for 25 pcs of       remotes, if the remote get more than 25 pcs, the initial remote control will be lost).

*RF Working Mode: Superheterodyne Reception (Modulation Mode:ASK).

*Perfect suitable for remote control of electric lamp, electrically operated gate, electrically operated   window, roller shutter door, garage door and other telecommand equipments.

* Work Perfect With Our Transmitter

Specifications(Technical Index):

• Product Type: Single Channel Remote Control Switch
• RF Working Mode: Superheterodyne Reception
• Modulation Mode: ASK
• Working Mode: Momentary, Toggle, Latching and Time Delay Mode.
• Input Voltage: DC 10 ~ 14V
• RF Frequency: 433MHz
• Quiescent Current: 5mA
• Receiving Sensitivity: >97dbm
• Remote Control Range: >100m (Free Space).
• Wired Connection Way: Fixed Wiring Pillar.
• Decoding Mode:MCU Software Decoding.
• Working Mode:Momentary, Toggle, Interlocked Mode Latching Time delay (5s ,10s ,15s )
• Wiring Diagram 1:
• +V : 12V + (Input).
• - V:  12V - (Input).
• NO: Normal Open(Output).
• COM:Common(Output).
• NC: Normal Close(Output).
• Color: Green (PCB Board), Black(Outside Shell)
• Circuit Board Size: 3.5 * 3.0 * 1.8cm/ 1.37 * 1.18 * 0.7in
• Circuit Board Weight:16.4g/0.57oz
• Package Size:3.9 * 3.5 * 2.5cm / 1.53 * 1.18 * 0.98in
• Package Weight: 27.2g / 0.95oz

Operation Introduction:

About Working Mode:

• Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.
• Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.
• Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.
• Time Delay Mode : Press the remote control button, the relay connects; Start timing when release the remote button, the relay disconnect automatically after 5s or 10s or 15s.

Clearing the Code:

1. Press the Learning Button on the receivers for 8 times, the codes will be cleaned.
2. After cleaning the code, all the remote control cannot work any more.

Learning the Code:(Momentary)

1. Press the learning key on the receiver once time, it comes into momentary setting mode.
2. Wait for a moment, the LED will be off , it comes into learning state.
3. Push the remote button, LED indicator on the receiver board will flash then come off.
4. After 3 seconds, the LED indicator will be on again, learning successfully.

Learning the Code: (Toggle)

1. Press the learning key on the receiver twice time, it comes into toggle setting mode.
2. Wait for a moment, the LED will be off , it comes into learning state.
3. Press the remote button, LED indicator on the receiver board will flash then come off.
4. After 3 seconds, the LED indicator will be on again, learning successfully.

Learning the Code:( Latching)

Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF.

For example: Button A = ON, Button B = OFF

1. Press the learning key on the receiver triple time, it comes into latching mode .
2. Wait for a moment, the LED indicator on the receiver board will flash then come off.
3. Press the remote button A. LED flash for 5 times.
4. Press the remote button B. LED flash for 5 times
5. After 3 seconds, the LED indicator will be on again, learning successfully.
6. A = ON, B = OFF .

Learning the Code :(Time Delay Mode)

1. Press the learning key on the receiver four times, the time delay for 5 seconds.
2. Press the learning key on the receiver five times, the time delay for 10 seconds.
3. Press the learning key on the receiver six times, the time delay for 15 seconds. The LED indicator will be off . Press the remote button, LED flashes and off.
4. After 3 seconds, the LED indicator will be on again, means learning successfully.