8+2 Port 100 Mbit/s PoE switch is independently developed and designed by Huacheng Century. It is a high performance and low power consumption 100 Mbit/S PoE switch. It is the primary option for small and medium sized LAN. It provides 10*10/100Mbps RJ45 ports, of which ports 1-8 support IEEE 802.3af/at standard PoE power supply, intelligent identification of electrical devices, and support for 250m network extension. It can be used to connect upstream devices with higher bandwidth. Store and forward technology is used to ensure that the bandwidth is effectively allocated to each port. Full-line speed 100 megabit connection to workgroups or servers for easy plug and play, this flexible non-blocking architecture allows users to use without bandwidth and media network constraints. The switch supports half-duplex and full-duplex working modes, and each switch port supports the self-adaptation function. The port uses the store-and-forward mode, providing superior performance, simplicity, convenience, and intuitive networking solutions for working group users or small local area networks.
Non-network management model, plug and play, no configuration, easy to use.
Product description
◆ Comply with IEEE802.3, IEEE802.3U, IEEE802.3X standards.
◆ 8*10/100 Base-TX Ethernet ports (Data/Power), 2* 10/100 Base-T Ethernet ports (Data).
◆ 1K MAC address and MAC address automatic learning.
◆ IEEE 802.3x full pair. Flow control and half double. backpressure flow control.
◆ 2 Gbps non-blocking wire speed forwarding backplane tape.
◆ Support 250m network extension.
◆ Maximum PoE port power :30W. Maximum PoE port power: 125W.
◆ Desktop wall mounted, plug and play.
◆ Supports 25M clock and RFC MIB counter
◆ Built-in power supply, hardware shell design.
Product Feature:
1) 6KV lightning protection
Provides 6KV high level lightning protection. PoE supports short circuit and overload protection. The power supply supports over temperature protection and over voltage protection.
2) Uplink & NVR Up-connection port
Provides two 10/100M RJ45 ports for simultaneous access to the NVR and router, synchronous viewing of local monitoring and cloud monitoring. Reducing equipment investment costs.
3) One-click VLAN & Network extension
One-key DIP switch enables the extension and VLAN isolation modes. The maximum transmission distance can be up to 250 meters.