24V DC swing gate opener automatic door operators double gate motor wheel swing gate opener

DC24V Wheel swing gate opener

specification

I nput Voltage	220V/ 110V
Working Voltage	DC 24V
Ambient Temperature	-50 ~ +50 Celsius degree
Gate Width (per wing)	<= 6M
Gate Weight (per wing)	<= 600kgs
Regular Components	2 motors, 1 panel, 2 remote controllers
Optional Parts	IR sensor, storage battery, visual doorbell, card reader, fingerprint reader
Weight (kg)	23
Dimension (cm)	42*32*31
Package	Color printing carton with foam

Basic features:

2 wired control system and integrating movement limiting with motor.

Basic functions:

1. open up or close up in sequence

2. Automatically stopping function against extra resistance

3. Infrared protection interface

4. back-up power supply interface

5. operating time limit protection

6. optional operation mode for single or dual wing

7. adjustable interval setting in sequent close-up

8 adjustable operating time limit setting

9. automatically stopping and running reversely against excessive resistance during closing-up

10. interface for card reader and underground detector

11. adjustable time setting for automatic close-up function

Product features:

1. Easier to drive the gate: The motor is mounted on the far end from the hinge point.

2. Special sliding groove: This enables the tolerance to the unevenness of road surface up to

90mm, maximum tolerance up to 300mm.

3. Unlimited opening angle: As far as the opener is concerned, the opening angle can be

greater than 180°.

4. Automatic locking unit: This unit combines the closing and the locking actions.

5. Optional manual operation: At power cut, the operation mode can be easier switched to

manual with a key.

6. Convenient installation: Can be mounted to any gate regardless of the condition of gate

posts or gate itself.