Acetic General Purpose Silicone Sealant Clear Silicone Caulking for indoor

Product Description

Technical Data

Test Parameter	Unit	Translucent		Pigmented
As Supplied Tested at 23°C and 50% RH
Specific Gravity	g/ml	0.96±0.02	1.45±0.02
Flow (sag or slump)	mm	0	0
Extrusion Rate Skin Time	ml/minute minute	180 10	102 ≤30
Tack-free Time	hour	≤1	≤22
Curing time (5mm)	hour	≤24	≤24
As Cured-after 21 days at 23°C and 50% RH
Durometer Hardness, Shore A	Points	≤1	≤22

Product Details

Product Use

Application:

1. Gap filling around door and window frame.

2. For general bonding and sealing application glass, aluminum, plastic, tile ceramic, etc.

3. Glass to glass, glass to aluminum, glass to plastic, aluminum to aluminum, aluminum to plastic, plastic to plastic.

4.Used as sanitary decoration materials, in kitchen, bathroom and toilets.

Features:

1. One component, easy to use.

2. Neutral cure RTV silicone sealant, cure at room temperature.

3. Ease of application ready to use as supplied.

4. Excellent  rheology, low string upon gunning.

5. Ideal for expansion, connection, perimeter and other movement joints.

6.  Excellent weather ability, virtually unaffected by sunlight, rain, snow, ozone.

7. Extension/compression movement capability of up to ±50 percent of the original joint width.

8. Excellent unprimed adhesion to a wide variety of construction materials and building components.

9. Suitable for use uncoated glass, galvanized steel, masonry and other porous and nonporous substrates.

Directions:

Must use a solvent such as toluene or acetone,at the interface clean and keep dry.Construction of application of sealant to completely fill the joints to ensure that both sides of bonding.They needs to protect the side labeled tape,but not touch the tape will be the construction surface.The plastic is not cured prior to trimming immediately in order to achieve a beautiful look.

Cautions:

1.Not available in all surface leaking grease,plasticize or solvents.

2.Difficult for enclose spaces or in direct contact with the surface of the food or drinking water.

3.The substrate surface temperature is below 4℃or over 40℃ not construction.Should not adhered copper or copper alloy material.

Warnnings:

Sealant construction site,special attention should maintain good ventilation;placed where children can not reach in order to avoid eating;If accidental eyes contact with the uncured adhesive,should be cleaned with plenty water and consult a doctor.

Shelf Life:

Storage period:Maintain the original sealed condition stored in the cool and dry place below 27℃.The storage period is 12 months.

Standard:

GB/T14683-2003

Color:

Silicone sealant have various colors, common colors are black, white porcelain, transparent, clear, gray, bronze and so on, Other colors can be customized according to customer requirements.