New 1+2+4+6 10 Prong Stitching Punch Tool 3/4/5/6mm Leather Tools Hole Punches
Specifications: 67 grams for 3MM, 82 grams for 4MM, 107 grams for 5MM, 115 grams for 6MM
Use: The diamond is a consumable, such as a blade, the scissors will be blunt for a long time, the customer must pay attention to the following points when using:
1. When punching, the rhombic must be perpendicular to the leather surface to prevent the tooth decay from being interrupted by the tilt of the rhombic!
2. It is best not to use a hammer when hitting a diamond. You can use a rubber hammer or a hammer!
3. It is best to use a soft object under the skin to protect the tip of the file. It is recommended to use a grid or a cutting board!
4. When the diamond is not in use, apply a layer of oil to the day and put on the rubber sleeve for protection and maintenance.
The 4mm pitch (tooth surface 2.0mm) is suitable for medium-thickness middle-weight items such as key cases and wallet-sized leather goods. (Most used)
note:
1. When punching, the rhombic must be perpendicular to the leather surface to prevent it from tilting and interrupting the molars!
2. Do not use a hammer/tap when tapping the diamond. You need a hammer or a specific mounting hammer! The impact of the hammer hammer on the diamond is much easier to break.
3. When using the diamond to punch holes, please use the special protective cushion for the leather to protect the tip of the file, and directly hit it on the hard object, which may break the tooth.
3. When the diamond is not used for a long time, it can be coated with a layer of oil and a rubber sleeve to extend the life.
1 tooth ridge: used for bracket turning or need to adjust the spacing
2 tooth ridges: for the curve to turn two holes
4 tooth lings: for straight holes, the most widely used!
6-toothed diamond: used when playing a long straight line, you can play 6 holes at a time, it is very convenient
Snoring method:
1. Adjust the spacing gauge and set the spacing of the scribe line. 2 Align the distance line on the leather. 3. Use a 6-toothed scorpion on the longer straight line to save time and effort. Press 2 holes before snoring (not easy to deflect) 4. Two teeth are applied to the corners. 5. One tooth adjustment interval
other styles
Splinkteach DIY Leathercraft Carving Leather Tools sets hollow metal punch DIY Craft Leather Working Tools Metal Construction Leather Craft Tools
Features:
Material: Carbon Steel
Machined diamond-patterned grip for a secure, no-slip hold under the hammer
Heat-hardened, high carbon steel construction for long lasting sharpness & dura
0.5mm – 10mm Sharp Hollow Hole Round Punch Tool Set Leather Fabric Plastic Paper
This punch tool is made of hard metal rod with a shaped tip at one end and a blunt end at the other end.
Hollow hole punch for Leather, Fabric, Rubber punch, Vinyl, PVC, Plastic, Gaskets, Wood, Paper, Cardbaord, Crafts, Metal, Foam, Fiber, Watch Straps, Belts, Scrapbooking and Bags & Wallets Clean Cut.
Woodworkers use a ball-peen hammer to strike a punch to get good result. Punches are used to drive object easily into the wood, such as nails. Sometime it uses to decorate wood creating different size holes and create a pattern or even form an image.
Hollow Hole Punches are available in Different Sizes;
1mm 12mm
2mm 13mm
2.5mm 14mm
3mm 15mm
3.5mm 16mm
4mm 18mm
5mm 19mm
6mm 20mm
7mm
8mm
9mm
10mm
11mm