NaN / 0

Honeywell C6097A2210 Gas Pressure Controller Safety Adjustment Switch Vibration Mode Safety Limit Switch For Gas Burner

Get Latest Price

US$ 76

≥1 Pieces

US$ 74

≥2 Pieces

US$ 72

≥10 Pieces

Quick Details

Max. Voltage:

250V

Place of Origin:

China

Brand Name:

Honeywell

Model Number:

C6097A2210

Max. Current:

Brand:

Honeywell

Model:

C6097A2210

Name:

Gas Burner Pressure Switch

Supply Voltage:

AC220-230V 560/60HZ

Minimum Ambient Temperature::

-40°F (-40°C)

Maximum Ambient Temperature::

140°F (60°C)

Gross weight:

Less 1kg

Color:

Blue

Usage:

gas burner accessories

After Warranty Service:

Video technical support

Certification:

Product Details

PRODUCT SPECIFICATIONS

Honeywell C6097A2210 Gas Pressure Switch Vibration Mode Safety Limit Switch For Gas Burner

FEATURES
* For use with natural gas, liquid propane (LP) gas, or air.
* Diaphragm-actuated safety-limit switch.
* Switch can be wired to turn on alarm.
* C6097A models break control circuit at setpoint on pressure fall.
* C6097B models break control circuit at setpoint on pressure rise.
* Lockout with manual reset and recycle options.
* Lockout models have external manual reset button.
* Removable transparent cover protects scaleplate and adjusting knob.
* Pipe tappings allow selection of positive pressure, differential pressure (air only) or venting connections (NPT mount only).
* 1/4 in. NPT or flange mount models for direct mounting to Honeywell Integrated Valve Train.
* Optional switch position indicator lamp available.
* IP54 enclosure standard.
* Ranges: 0.4 to 5 in. wc, 3 to 21 in. wc, 12 to 60 in. wc or 1.5 to 7 psi.
* Surge orifice.
* Integral Vent Limiter (all models

C6097A2210

Model	C6097A2210
Brand	Honeywell
Name	Gas Pressure Switch
Usage	gas burner accessories

Honeywell C6097A2210 Gas Pressure Switch Vibration Mode Safety Limit Switch For Gas Burner

Specification:

Models:
C6097A Pressure Switch: Breaks a circuit when pressure falls to scale setting. See Table 1.
C6097B Pressure Switch: Breaks a circuit when pressure rises to scale setting. See Table 1.
Table 2 shows switch ratings and Table 3 shows alternate electrical ratings when used with Honeywell Flame Safeguard Programmers.
Minimum Ambient Temperature: -40°F (-40°C).
Maximum Ambient Temperature: 140°F (60°C).

Connections (Depending on Model):
1/4-18 NPT tapping for main or high-pressure connection.
1/8-27 NPT tapping for vent or low-pressure connection
(air only).
Flange mount for connection to Honeywell Integrated Valve
Train (internal vent only, no external connections).
Scale Range:
0.4 to 5 in. wc (0.10 kPa to 1.25 kPa).
3 to 21 in. wc (0.75 to 5.23 kPa).
12 to 60 in. wc (3.0 kPa to 15 kPa).
1.5 to 7 psi (10.3 kPa to 48 kPa).
Approvals:
Underwriters Laboratories Inc. listed.
Canadian Standards Association listed.
Factory Mutual: Approved.
Industrial Risk Insurers: Acceptable.
CSD-1 AFB: Acceptable.
Accessories:
32003041-001 C6097 Cover for manual reset models.
32003040-001 C6097 Cover for recycle models.
32003039-001 Position Indication Lamp Kit (for 120 Vac only)
Dimensions: See Fig. 1 and 2

Honeywell C6097A2210 Gas Pressure Switch Vibration Mode Safety Limit Switch For Gas Burner

Installation:

Installing the Position Indication Lamp Kit
(See Fig. 4)
1. Remove the cover from the C6097 by removing the screws in the upper left and lower right quadrants of the
cover.
2. Place the lamp in the slot to the right of the dial, in the upper right-hand corner of the C6097, with the base
down. Run the two lamp wires through the slit in the upper left corner of the lamp slot.
3. Place the nut in the hexagonal depression in the lower left-hand corner of the C6097.
4. Place the terminal plate over the nut and fasten the terminal plate to the C6097 with the screw through the
bottom hole in the terminal plate.
5. Place the captive screw through the terminal lug on the shorter wire and fasten the wire to the terminal plate with
the captive screw secured by the nut under the terminal
plate.
6. Using Fig. 5 or 6 for reference, fasten the terminal lug on the longer lamp wire to either the normally open (NO) or
normally closed (NC) terminal of the C6097.