NaN / 0
Liquid Two Parts Adhesives Clear Transparent Epoxy Resin AB Glue for Woodtable Art Resin Table Casting
Get Latest Price
US$ 8.5
≥1 Kilograms
US$ 7.8
≥200 Kilograms
US$ 6.8
≥2000 Kilograms
US$ 5.58
≥5000 Kilograms
Quick Details
CAS No.:
38891-59-7
Other Names:
Casting epoxy resin
MF:
C15H16O2C2H7ONC3H5OCl
EINECS No.:
231-072-3
Product Details
Products Description
|
Part
|
318A-7T
|
318B-7T
|
|
|
Color
|
Transparent
|
Transparent
|
|
|
Specific gravity
|
1.15
|
0.96
|
|
|
Viscosity (25℃)
|
800-2500CPS
|
100 MAXCPS
|
|
|
Mixing ratio
|
A:B=3:1(Weight Ratio)
|
|
|
|
Hardening conditions
|
25°C × 24H-48H
|
|
|
|
Usable time
|
25°C × 150mins
|
|
|
Operation Steps
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing,suggest to use the heat curing.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing,suggest to use the heat curing.
Product Show
Packing & Shipping
Related Products
30%
Hot Searches