NaN / 0

Multi-Purpose Super SBS Glue for Bonding Wood Boards

Get Latest Price

US$ 1.52

≥500 Kilograms

Quick Details

CAS No.:

35069900

Other Names:

all purpose adhesive

MF:

N/M

EINECS No.:

230-391-5

Place of Origin:

Guangdong, China

Brand Name:

Maydos

Model Number:

EC3000W

Type:

Liquid

Name:

SBS glue/spray adhesive/SBS contact adhesive/SBS decoration adhesive

Appearance:

light yellow viscous liquid

Viscosity:

32±2%

Solids Content:

34%-36%

Shear Strength:

30 minutes ≥ 0.6mpa 48 hours ≥ 1.0mpa

Specific Gravity:

0.78kg/L

VOC:

≤ 200 g/L

Initial bonding power:

≥0.6MPa

Dosage:

185-250g/m2

Application Tools:

Brush or spray gun

Product Details

Products Description

Multi-Purpose Super SBS Glue for Bonding Wood Boards

Description

Maydos SBS Adhesive is formulated from excellent materials. It has good features
such as easily construct, rapid drying speed, powerful viscidity, resist ultraviolet
radiation after solidification, be able to bear or endure canker, strike. Prevent damp,
resist aging.

Recommended use

Suitable for contacting between different materials such as plywood, board,
floorboard, wallpaper, rubber, anti-firing plate, aluminum-plastic plate and cloths, etc.
It can be widely used for both hard-to-contact materials like anti-firing plate,
aluminum-plastic plate and PVC board, and common board like wood board, plywood,
MDF board,floor board, furniture, wallpaper, polyester plywood, bamboo board,
asbestos board, carpet, rubber, etc.

Technical Data

Appearance	light yellow viscous liquid, no visible foreign matters
Viscosity	55-60 ku / 30°C 300-550 MPa. S/25°C
Solids Content	34%-36%
Shear Strength	30 minutes: ≥0.7mpa 48 hours: ≥1.1mpa
Specific Gravity	0. 86-0.87kg/L
VOC	≤700 g/L

Feature

Features:

1.Adopted benzene free, no hazardous materials and additives, low VOC, protect the applicator and consumers’ health.
2.High solid content: Solid content exceed 34%, much higher than conventional adhesives,effectively save adhesive consumption (dosage) by 30%-40%.
3.Freezing temperature resistant: no influence at -15°C to -20°C. Easy for transport and bonding in winter.
4.Super first-bonding power, good penetration property, quick dry.
5.Stable performance: moisture resistant after hardening, water-immersion resistant, good impact resistant, long service life.

Directions for use
Surface preparation the grease, smirch, rust, moisture of the contacted surface must be cleaned off, surface of bamboo, leather or rubber etc must be matted.
Recommended apply system
Brushing	The effect will be better if stir thoroughly or make the pot inverted repeatedly in order to mix the glue before use. The contacted surface is brushed by the adhesive in thin layer, brushing toward a same aspect for air getting out to strengthen the powerful viscidity.
Airing	Wait for 5 to 25 minutes (25 Celsius) after brushing, until the condition is proper to agglutinate.
Contacting	Contacting is level one time because the viscidity is super powerful, add pressure or tapping for the super viscidity of continua adhesive.
Remark
The most suitable temperature and humidity for contacting (bonding): 20°C -30°C, humidity: 55%-75%
Adhesive contains VOC, easily burnt, keep away from fire. Make sure the construction site is well ventilated.
No. of Regulation On Transporting Dangerous Goods: 32196